Market Overview:
The global automobile engine bent axle market is estimated to be valued at US$ XX Mn in 2018 and is projected to reach US$ XX Mn by 2030, exhibiting a CAGR of X.X%. The market growth can be attributed to the increasing demand for passenger vehicles and commercial vehicles across the globe. Cast camshaft segment is expected to account for a major share of the global automobile engine bent axle market during the forecast period. This can be attributed to its properties such as high strength-to-weight ratio, good wear resistance, and dimensional accuracy. Passenger vehicles segment is anticipated to account for a larger share of the global automobile engine bent axle market during the forecast period. This can be ascribed to increase in demand for passenger cars owing rising income levels across developing countries such as China and India.
Product Definition:
An automobile engine bent axle is a type of mechanical failure that can occur in automobiles. It is caused when the axle, which connects the wheels to the car's engine, bends or breaks. This can cause severe damage to the car and may even lead to a complete breakdown. The importance of an automobile engine bent axle lies in its ability to disable the vehicle and render it immobile.
Cast Camshaft:
Cast Camshaft is a type of camshaft, which is used in overhead valve engines. It has valves in it’s cylinder head and uses pushrods to actuate the valves. The advantages of cast camshaft are that they are light, cheap & easy to manufacture and can be modified as per requirement without affecting the other parts of the engine.
Forged Steel Camshaft:
Forged steel camshaft and it's usage in automobile engine bent axle market is expected to witness significant growth over the forecast period. The primary factor that propels the growth of this market includes growing demand for automobiles across emerging economies such as India, China, Brazil and Middle East countries.
Global forged steel camshaft.
Application Insights:
The passenger vehicles segment held the largest share of over 60.0% in 2017. The segment is expected to witness significant growth owing to increasing demand for passenger cars and light commercial vehicles in developing countries, such as India, China and Brazil. In addition, technological advancements coupled with low cost carrier are anticipated to propel industry expansion over the forecast period.
Commercial Vehicles (CVs) application segment is projected to expand at a CAGR of XX% from 2018 to 2030 owing to rising demand for trucks and buses from various industries across the globe including mining, construction materials among others.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing region, registering a CAGR of XX% from 2018 to 2030. The growth can be attributed to increasing production and sales of passenger cars in China and India as well as other countries in Asia Pacific, which will propel demand for auto engines bent axle worldwide. In addition, rising disposable income coupled with growing urbanization across these developing economies is expected to fuel demand for automobiles over the forecast period.
Europe accounted for more than 25% market share in terms of volume in 2017 owing to high production volumes of passenger cars and commercial vehicles there. However, sluggish growth rate observed since 2016 on account of economic slowdown post Brexit along with stringent emission norms by European Union may hamper industry growth over the next eight years; however it will benefit market maturity during this period thereby impacting overall industry dynamics positively.
Growth Factors:
- Increasing demand for automobiles: The global automobile industry is growing at a fast pace. This is expected to drive the demand for automotive engine bent axle market in the coming years.
- Technological advancements: The automotive engine bent axle market is witnessing rapid technological advancements, which is resulting in the development of new and innovative products. This is likely to boost the growth of this market in the near future.
- Rising disposable income: With rising disposable incomes, consumers are increasingly opting for premium cars, which require high-quality automotive engine bent axles. This will fuel the growth of this market in forthcoming years.
Scope Of The Report
Report Attributes
Report Details
Report Title
Automobile Engine Bent Axle Market Research Report
By Type
Cast Camshaft, Forged Steel Camshaft, Assembled Camshaft
By Application
Passenger Vehicles, Commercial Vehicles
By Companies
Volkswagen AG, Toyota, General Motors, Ford, Benz, BMW, Peugeot/Citroen, Fiat, Hyundai Motor, Mitsubishi Motors, Commins, Honda
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
242
Number of Tables & Figures
170
Customization Available
Yes, the report can be customized as per your need.
Global Automobile Engine Bent Axle Market Report Segments:
The global Automobile Engine Bent Axle market is segmented on the basis of:
Types
Cast Camshaft, Forged Steel Camshaft, Assembled Camshaft
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Passenger Vehicles, Commercial Vehicles
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Volkswagen AG
- Toyota
- General Motors
- Ford
- Benz
- BMW
- Peugeot/Citroen
- Fiat
- Hyundai Motor
- Mitsubishi Motors
- Commins
- Honda
Highlights of The Automobile Engine Bent Axle Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Cast Camshaft
- Forged Steel Camshaft
- Assembled Camshaft
- By Application:
- Passenger Vehicles
- Commercial Vehicles
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Automobile Engine Bent Axle Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
An automobile engine bent axle is a type of axle that has been damaged in some way, most commonly by being twisted. Bent axles can cause decreased fuel efficiency and increased emissions, as well as other problems with the car's performance.
Some of the key players operating in the automobile engine bent axle market are Volkswagen AG, Toyota, General Motors, Ford, Benz, BMW, Peugeot/Citroen, Fiat, Hyundai Motor, Mitsubishi Motors, Commins, Honda.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Automobile Engine Bent Axle Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Automobile Engine Bent Axle Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Automobile Engine Bent Axle Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Automobile Engine Bent Axle Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Automobile Engine Bent Axle Market Size & Forecast, 2020-2028 4.5.1 Automobile Engine Bent Axle Market Size and Y-o-Y Growth 4.5.2 Automobile Engine Bent Axle Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Cast Camshaft
5.2.2 Forged Steel Camshaft
5.2.3 Assembled Camshaft
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Passenger Vehicles
6.2.2 Commercial Vehicles
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Automobile Engine Bent Axle Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Automobile Engine Bent Axle Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Cast Camshaft
9.6.2 Forged Steel Camshaft
9.6.3 Assembled Camshaft
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Passenger Vehicles
9.10.2 Commercial Vehicles
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Cast Camshaft
10.6.2 Forged Steel Camshaft
10.6.3 Assembled Camshaft
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Passenger Vehicles
10.10.2 Commercial Vehicles
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Cast Camshaft
11.6.2 Forged Steel Camshaft
11.6.3 Assembled Camshaft
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Passenger Vehicles
11.10.2 Commercial Vehicles
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Cast Camshaft
12.6.2 Forged Steel Camshaft
12.6.3 Assembled Camshaft
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Passenger Vehicles
12.10.2 Commercial Vehicles
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Cast Camshaft
13.6.2 Forged Steel Camshaft
13.6.3 Assembled Camshaft
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Passenger Vehicles
13.10.2 Commercial Vehicles
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Automobile Engine Bent Axle Market: Competitive Dashboard
14.2 Global Automobile Engine Bent Axle Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Volkswagen AG
14.3.2 Toyota
14.3.3 General Motors
14.3.4 Ford
14.3.5 Benz
14.3.6 BMW
14.3.7 Peugeot/Citroen
14.3.8 Fiat
14.3.9 Hyundai Motor
14.3.10 Mitsubishi Motors
14.3.11 Commins
14.3.12 Honda