Market Overview:
Static seal gasket is a type of gasket that seals two stationary objects together. Static seal gaskets are used in a wide variety of applications, including engine blocks, cylinder heads, and auxiliary components. The global automotive static seal gasket market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth of the market can be attributed to the increasing demand for automobiles and the growing popularity of electric vehicles (EVs). The global automotive static seal gasket market can be segmented by type, application, and region. By type, the market can be divided into engine block gaskets, cylinder head gaskets, and auxiliary components. By application, the market can be classified into OEM and aftermarket segments.
Product Definition:
Static Seal Gasket is a type of gasket that seals two surfaces without the use of bolts or screws. Static Seal Gaskets are commonly used in automotive applications to seal between the engine block and the head.
Engine Block Gasket:
The engine block gasket is a seal that prevents the movement of fluid between two engine blocks. It is usually found on the front of an automobile, and its job is to prevent water or any other type of coolant from getting into the combustion chamber. The primary function performed by an E-block gasket includes sealing around each cylinder bank and also at the crankshaft journal.
Cylinder Head Gasket:
The cylinder head gasket is a sealing device that prevents the flow of combustion gases into the cylinders and protects them from high temperatures. It also helps in maintaining pressure between the piston and liner, thus preventing damage to rings or valves. The gasket is installed on top of each cylinder head, generally in two separate covers; one for each side. On some engines however, both sides are fitted with a single cover.
Application Insights:
OEMs use these gaskets to assemble various vehicles, including passenger cars, light commercial vehicles (LCVs), and heavy commercial vehicles. The demand for OEMs is generally higher as they offer a high level of consistency in terms of fit and finish across the vehicle range. In addition, they provide better protection against leakage due to superior sealing properties.
The aftermarket segment is expected to expand at a CAGR of XX% from 2018 to 2030 owing to the growth in replacement activities triggered by product failures or wear & tear on the part of components such as engine block or cylinder head assembly. These failures are usually observed during manufacturing units where there may be some room for improvement with respect quality control procedures followed by manufacturers involved in automotive production worldwide.
Static seal gasket finds application between engine block.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing region, registering a CAGR of XX% from 2018 to 2030. The growth can be attributed to increasing vehicle production in countries such as India and China owing to low manufacturing cost coupled with government support for Make in India initiative. In addition, rising disposable income will drive the demand further.
Europe accounted for over 25% of revenue share in 2017 on account of presence of stringent regulations aimed at reducing carbon dioxide emissions from new vehicles introduced into the market since 2010 known as New European Drive Cycle (NEDC).
Growth Factors:
- Increasing demand for automobiles
- Growing automotive industry
- Rising disposable income of consumers
- Technological advancements in static seal gasket technology
- Growing awareness about the benefits of using static seal gaskets
Scope Of The Report
Report Attributes
Report Details
Report Title
Automotive Static Seal Gasket Market Research Report
By Type
Engine Block Gasket, Cylinder Head Gasket, Auxiliary Gasket
By Application
OEM, Aftermarket
By Companies
ElringKlinger, Freudenberg Sealing Technologies, Federal-Mogul, Dana, Uchiyama, Interface Performance Materials, Sanwa Packing Industry, Yantai Ishikawa, Talbros Automotive Components, Guanghe, ElringKlinger
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
120
Number of Tables & Figures
84
Customization Available
Yes, the report can be customized as per your need.
Global Automotive Static Seal Gasket Market Report Segments:
The global Automotive Static Seal Gasket market is segmented on the basis of:
Types
Engine Block Gasket, Cylinder Head Gasket, Auxiliary Gasket
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
OEM, Aftermarket
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- ElringKlinger
- Freudenberg Sealing Technologies
- Federal-Mogul
- Dana
- Uchiyama
- Interface Performance Materials
- Sanwa Packing Industry
- Yantai Ishikawa
- Talbros Automotive Components
- Guanghe
- ElringKlinger
Highlights of The Automotive Static Seal Gasket Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Engine Block Gasket
- Cylinder Head Gasket
- Auxiliary Gasket
- By Application:
- OEM
- Aftermarket
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Automotive Static Seal Gasket Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
An automotive static seal gasket is a type of gasket used in automotive applications to prevent air and fluid leakage.
Some of the major players in the automotive static seal gasket market are ElringKlinger, Freudenberg Sealing Technologies, Federal-Mogul, Dana, Uchiyama, Interface Performance Materials, Sanwa Packing Industry, Yantai Ishikawa, Talbros Automotive Components, Guanghe, ElringKlinger.
The automotive static seal gasket market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Automotive Static Seal Gasket Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Automotive Static Seal Gasket Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Automotive Static Seal Gasket Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Automotive Static Seal Gasket Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Automotive Static Seal Gasket Market Size & Forecast, 2018-2028 4.5.1 Automotive Static Seal Gasket Market Size and Y-o-Y Growth 4.5.2 Automotive Static Seal Gasket Market Absolute $ Opportunity
Chapter 5 Global Automotive Static Seal Gasket Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Automotive Static Seal Gasket Market Size Forecast by Type
5.2.1 Engine Block Gasket
5.2.2 Cylinder Head Gasket
5.2.3 Auxiliary Gasket
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Automotive Static Seal Gasket Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Automotive Static Seal Gasket Market Size Forecast by Applications
6.2.1 OEM
6.2.2 Aftermarket
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Automotive Static Seal Gasket Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Automotive Static Seal Gasket Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Automotive Static Seal Gasket Analysis and Forecast
9.1 Introduction
9.2 North America Automotive Static Seal Gasket Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Automotive Static Seal Gasket Market Size Forecast by Type
9.6.1 Engine Block Gasket
9.6.2 Cylinder Head Gasket
9.6.3 Auxiliary Gasket
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Automotive Static Seal Gasket Market Size Forecast by Applications
9.10.1 OEM
9.10.2 Aftermarket
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Automotive Static Seal Gasket Analysis and Forecast
10.1 Introduction
10.2 Europe Automotive Static Seal Gasket Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Automotive Static Seal Gasket Market Size Forecast by Type
10.6.1 Engine Block Gasket
10.6.2 Cylinder Head Gasket
10.6.3 Auxiliary Gasket
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Automotive Static Seal Gasket Market Size Forecast by Applications
10.10.1 OEM
10.10.2 Aftermarket
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Automotive Static Seal Gasket Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Automotive Static Seal Gasket Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Automotive Static Seal Gasket Market Size Forecast by Type
11.6.1 Engine Block Gasket
11.6.2 Cylinder Head Gasket
11.6.3 Auxiliary Gasket
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Automotive Static Seal Gasket Market Size Forecast by Applications
11.10.1 OEM
11.10.2 Aftermarket
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Automotive Static Seal Gasket Analysis and Forecast
12.1 Introduction
12.2 Latin America Automotive Static Seal Gasket Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Automotive Static Seal Gasket Market Size Forecast by Type
12.6.1 Engine Block Gasket
12.6.2 Cylinder Head Gasket
12.6.3 Auxiliary Gasket
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Automotive Static Seal Gasket Market Size Forecast by Applications
12.10.1 OEM
12.10.2 Aftermarket
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Automotive Static Seal Gasket Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Automotive Static Seal Gasket Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Automotive Static Seal Gasket Market Size Forecast by Type
13.6.1 Engine Block Gasket
13.6.2 Cylinder Head Gasket
13.6.3 Auxiliary Gasket
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Automotive Static Seal Gasket Market Size Forecast by Applications
13.10.1 OEM
13.10.2 Aftermarket
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Automotive Static Seal Gasket Market: Competitive Dashboard
14.2 Global Automotive Static Seal Gasket Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 ElringKlinger
14.3.2 Freudenberg Sealing Technologies
14.3.3 Federal-Mogul
14.3.4 Dana
14.3.5 Uchiyama
14.3.6 Interface Performance Materials
14.3.7 Sanwa Packing Industry
14.3.8 Yantai Ishikawa
14.3.9 Talbros Automotive Components
14.3.10 Guanghe
14.3.11 ElringKlinger