Market Overview:
The global conduit clips market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for electric power, metallurgy, oil, and chemical products. Additionally, the growing infrastructure development in emerging economies is also contributing to the growth of the global conduit clips market. The polyamide material segment is expected to dominate the global conduit clips market during the forecast period owing to its properties such as high strength-to-weight ratio and resistance against corrosion and abrasion. The zinc-plated material segment is projected to grow at a higher CAGR during 2018–2030 due its properties such as durability and rust resistance.
Product Definition:
A conduit clip is a small metal or plastic device used to secure conduit to a surface. The clip has two prongs that fit over the outside of the conduit, and two screws that fasten it to the surface.
Polyamide Material:
Polyamide material is a synthetic, thermoplastic elastomer. It has high resistance to solvents, acids and bases and is also resistant to most chemicals. Polyamide can be heat molded easily and has the ability to retain its shape even after being bent or rolled. It can also hold a charge unlike rubber which makes it impossible for electrics to touch the surface making it safe for use in electrical conduits as well.
Zinc-plated Material:
Zinc-plated materials are used in manufacturing of clips that hold the insulation in place. The material is plated with zinc to prevent the copper from reacting with the moisture present inside the conduits. These products are widely used by electric utilities and telecommunication companies for insulating their power and communication cables, respectively.
Application Insights:
Electric power industry was the largest application segment in 2017 and is expected to grow at a CAGR of XX% over the forecast period. Conduit clips are used for protection against overloading, short-circuiting, and general maintenance of electrical equipment such as switchgear and transformers. Increasing number of power generation projects across various countries is anticipated to augment product demand in this segment.
The metallurgy industry accounted for 19% share in 2017 owing to rising demand from mining companies for clips that can withstand high pressure without getting deformed or broken. Polyamide material conduit clips are preferred by metallurgical industries on account of their low cost compared to stainless steel material counterparts which are more expensive due to higher raw materials requirement during manufacturing process.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing regional market with a CAGR of XX% from 2018 to 2030 owing to increasing infrastructure activities in the region. The demand for electrical Conduit Clips in this region is majorly driven by rapid industrialization and urbanization, which has led to an increase in electricity consumption and transmission & distribution (T&D) requirements across industries.
The growing oil & gas industry coupled with increasing investments across various countries including China, India, Japan, Australia and Indonesia are likely to boost product demand over the forecast period. In addition, rising government initiatives such as “Make in India†campaign by Indian Government are expected drive manufacturing sector growth within country leading to increased requirement for metal working machinery products including Conduit Clips over the next eight years.
Growth Factors:
- Increasing demand from construction and infrastructure industry for better grip and support of conduits.
- Growing popularity of conduit clips as an alternative to traditional methods of fixing conduits, such as welding or screwing them into place.
- Rising demand for clip-on type conduit clips that can be easily attached or detached, without the need for any tools.
- Technological advancements in the design and manufacturing of conduit clips that make them more durable and versatile than ever before.
Scope Of The Report
Report Attributes
Report Details
Report Title
Conduit Clips Market Research Report
By Type
Polyamide Material, Zinc-plated Material, Stainless Steel Material, Others
By Application
Electric Power Industry, Metallurgy Industry, Oil Industry, Chemical Industry, Others
By Companies
Nvent (Erico), Panduit, ABB, Orbit Industries, HellermannTyton, Minerallac, Hilti, Flexa, Ronbar, Cooper, Nvent (Erico), Unistrut, Walraven (Britclips), Murrplastik, Bridgeport Fittings, A＆G Mfg, Hua Wei Industrial, Cantexinc
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
137
Number of Tables & Figures
96
Customization Available
Yes, the report can be customized as per your need.
Global Conduit Clips Market Report Segments:
The global Conduit Clips market is segmented on the basis of:
Types
Polyamide Material, Zinc-plated Material, Stainless Steel Material, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Electric Power Industry, Metallurgy Industry, Oil Industry, Chemical Industry, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Nvent (Erico)
- Panduit
- ABB
- Orbit Industries
- HellermannTyton
- Minerallac
- Hilti
- Flexa
- Ronbar
- Cooper
- Nvent (Erico)
- Unistrut
- Walraven (Britclips)
- Murrplastik
- Bridgeport Fittings
- A＆G Mfg
- Hua Wei Industrial
- Cantexinc
Highlights of The Conduit Clips Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Polyamide Material
- Zinc-plated Material
- Stainless Steel Material
- Others
- By Application:
- Electric Power Industry
- Metallurgy Industry
- Oil Industry
- Chemical Industry
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Conduit Clips Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Conduit clips are a type of connector that allow electrical cables to be routed more easily and efficiently. They are often used in construction or manufacturing settings, where tight spaces or limited space can make it difficult to install wiring correctly.
Some of the major companies in the conduit clips market are Nvent (Erico), Panduit, ABB, Orbit Industries, HellermannTyton, Minerallac, Hilti, Flexa, Ronbar, Cooper, Nvent (Erico), Unistrut, Walraven (Britclips), Murrplastik, Bridgeport Fittings, A＆G Mfg, Hua Wei Industrial, Cantexinc.
The conduit clips market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Conduit Clips Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Conduit Clips Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Conduit Clips Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Conduit Clips Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Conduit Clips Market Size & Forecast, 2018-2028
4.5.1 Conduit Clips Market Size and Y-o-Y Growth
4.5.2 Conduit Clips Market Absolute $ Opportunity
Chapter 5 Global Conduit Clips Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Conduit Clips Market Size Forecast by Type
5.2.1 Polyamide Material
5.2.2 Zinc-plated Material
5.2.3 Stainless Steel Material
5.2.4 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Conduit Clips Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Conduit Clips Market Size Forecast by Applications
6.2.1 Electric Power Industry
6.2.2 Metallurgy Industry
6.2.3 Oil Industry
6.2.4 Chemical Industry
6.2.5 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Conduit Clips Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Conduit Clips Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Conduit Clips Analysis and Forecast
9.1 Introduction
9.2 North America Conduit Clips Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Conduit Clips Market Size Forecast by Type
9.6.1 Polyamide Material
9.6.2 Zinc-plated Material
9.6.3 Stainless Steel Material
9.6.4 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Conduit Clips Market Size Forecast by Applications
9.10.1 Electric Power Industry
9.10.2 Metallurgy Industry
9.10.3 Oil Industry
9.10.4 Chemical Industry
9.10.5 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Conduit Clips Analysis and Forecast
10.1 Introduction
10.2 Europe Conduit Clips Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Conduit Clips Market Size Forecast by Type
10.6.1 Polyamide Material
10.6.2 Zinc-plated Material
10.6.3 Stainless Steel Material
10.6.4 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Conduit Clips Market Size Forecast by Applications
10.10.1 Electric Power Industry
10.10.2 Metallurgy Industry
10.10.3 Oil Industry
10.10.4 Chemical Industry
10.10.5 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Conduit Clips Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Conduit Clips Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Conduit Clips Market Size Forecast by Type
11.6.1 Polyamide Material
11.6.2 Zinc-plated Material
11.6.3 Stainless Steel Material
11.6.4 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Conduit Clips Market Size Forecast by Applications
11.10.1 Electric Power Industry
11.10.2 Metallurgy Industry
11.10.3 Oil Industry
11.10.4 Chemical Industry
11.10.5 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Conduit Clips Analysis and Forecast
12.1 Introduction
12.2 Latin America Conduit Clips Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Conduit Clips Market Size Forecast by Type
12.6.1 Polyamide Material
12.6.2 Zinc-plated Material
12.6.3 Stainless Steel Material
12.6.4 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Conduit Clips Market Size Forecast by Applications
12.10.1 Electric Power Industry
12.10.2 Metallurgy Industry
12.10.3 Oil Industry
12.10.4 Chemical Industry
12.10.5 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Conduit Clips Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Conduit Clips Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Conduit Clips Market Size Forecast by Type
13.6.1 Polyamide Material
13.6.2 Zinc-plated Material
13.6.3 Stainless Steel Material
13.6.4 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Conduit Clips Market Size Forecast by Applications
13.10.1 Electric Power Industry
13.10.2 Metallurgy Industry
13.10.3 Oil Industry
13.10.4 Chemical Industry
13.10.5 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Conduit Clips Market: Competitive Dashboard
14.2 Global Conduit Clips Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Nvent (Erico)
14.3.2 Panduit
14.3.3 ABB
14.3.4 Orbit Industries
14.3.5 HellermannTyton
14.3.6 Minerallac
14.3.7 Hilti
14.3.8 Flexa
14.3.9 Ronbar
14.3.10 Cooper
14.3.11 Nvent (Erico)
14.3.12 Unistrut
14.3.13 Walraven (Britclips)
14.3.14 Murrplastik
14.3.15 Bridgeport Fittings
14.3.16 A＆G Mfg
14.3.17 Hua Wei Industrial
14.3.18 Cantexinc
