Market Overview:
The global fabricated slide gate market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The market growth is attributed to the increasing demand for fabricated slide gates in water conservancy projects, hydropower engineering, shipping hubs, and others. Stainless steel fabricated slide gates are the most commonly used type in the market and are expected to dominate the market during the forecast period. Asia Pacific is projected to be the fastest-growing region in terms of revenue during the forecast period owing to rapid industrialization and infrastructural development in countries such as China and India.
Product Definition:
A fabricated slide gate is a type of valve used to control the flow of fluid through a pipe. It is typically made from metal or plastic, and consists of two hinged plates that can be opened and closed to regulate the flow. Fabricated slide gates are often used in pipelines where it is important to be able to quickly open and close the valve in order to stop or start the flow of fluid.
Stainless Steel Fabricated Slide Gate:
As per the gate type, fabricated slide gates are classified into two types: vertical and horizontal. As per the location of installation, fabricated slide gates are installed in a factory setting either at the entrance or exit side of a facility. The primary function served by these devices is to control access to an area or portion of a facility where it is most often found in factories and manufacturing facilities.
Aluminum Fabricated Slide Gate:
Aluminum Fabricated Slide Gate is a device that is used to control the flow of vehicles on a factory floor. It works on the principle of gravity and uses weights or magnets to regulate traffic. The gate can be operated manually using a hand crank, motorized for automatic operation, or fully automated with the help of programmed microcontrollers.
Application Insights:
The application segment is segregated into water conservancy project, hydropower engineering, shipping hub and others. The shipping hub application segment accounted for the largest market share in 2017 and is expected to witness a CAGR of XX% over the forecast period owing to the increasing demand for efficient equipment at ports that handles large vessels with ease.
The water conservancy project was one of the major applications witnessed in fabricated slide gates as it offered reliable protection against corrosion while maintaining low maintenance cost as compared to other types of gates. Fabricated slide gate systems are used across various projects including Water Conservancy Project (WCP) in Saudi Arabia, Oyo State WCP Project in Nigeria, Kishangunji WCP Project Phase I & II along with Gomti riverfront development project Phase I & II located near Islamabad Capital Territory Pakistan among others which are estimated to drive industry growth over the coming years.
Regional Analysis:
Asia Pacific dominated the global fabricated slide gate market in 2016 and is expected to continue over the forecast period. This can be attributed to increasing infrastructural development activities, growing population, and rising demand for consumer goods. The region is also home to several emerging economies with expanding industrial sectors including China, India, Indonesia, Vietnam among others.
The Asia Pacific region has witnessed a significant rise in investments from foreign players particularly from developed countries such as U.S., Germany and Japan among others for setting up hydropower plants or shipping hubs due to which there has been an increase in construction activities across various applications thereby driving the demand for fabricated slide gates over the forecast period.
Growth Factors:
- Increasing demand for fabricated slide gates from the oil and gas industry as a result of the growth in exploration and production activities.
- Rising demand for fabricated slide gates from water management applications, owing to the increasing need to control water flow in various industries.
- Growing popularity of fabricated slide gates among municipal authorities for wastewater treatment plants due to their ability to handle large flows with minimal head loss.
- Proliferation of automated fabrication processes that are helping fabricators reduce lead times and manufacturing costs, thereby boosting market growth.
Scope Of The Report
Report Attributes
Report Details
Report Title
Fabricated Slide Gate Market Research Report
By Type
Stainless Steel Fabricated Slide Gate, Aluminum Fabricated Slide Gate, Others
By Application
Water Conservancy Project, Hydropower Engineering, Shipping Hub, Others
By Companies
Rotolok, Hydro Gate Co, Apollo Valves, Fresno Valves & Castings, Inc., Waterman Valve LLC, Rodney Hunt, Instream water Control, Mueller Water Products, Inc, Whipps, Inc, Carolina Conveying, Ameristar Fence Products, Alfa Laval Inc, UNICON ENGINEERS, Golden Harvest Inc.
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
236
Number of Tables & Figures
166
Customization Available
Yes, the report can be customized as per your need.
Global Fabricated Slide Gate Market Report Segments:
The global Fabricated Slide Gate market is segmented on the basis of:
Types
Stainless Steel Fabricated Slide Gate, Aluminum Fabricated Slide Gate, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Water Conservancy Project, Hydropower Engineering, Shipping Hub, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Rotolok
- Hydro Gate Co
- Apollo Valves
- Fresno Valves & Castings, Inc.
- Waterman Valve LLC
- Rodney Hunt
- Instream water Control
- Mueller Water Products, Inc
- Whipps, Inc
- Carolina Conveying
- Ameristar Fence Products
- Alfa Laval Inc
- UNICON ENGINEERS
- Golden Harvest Inc.
Highlights of The Fabricated Slide Gate Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Stainless Steel Fabricated Slide Gate
- Aluminum Fabricated Slide Gate
- Others
- By Application:
- Water Conservancy Project
- Hydropower Engineering
- Shipping Hub
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Fabricated Slide Gate Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A fabricated slide gate is a type of security gate that is made from metal or plastic. It is typically mounted on a frame and can be opened and closed using a handle or lever.
Some of the key players operating in the fabricated slide gate market are Rotolok, Hydro Gate Co, Apollo Valves, Fresno Valves & Castings, Inc., Waterman Valve LLC, Rodney Hunt, Instream water Control, Mueller Water Products, Inc, Whipps, Inc, Carolina Conveying, Ameristar Fence Products, Alfa Laval Inc, UNICON ENGINEERS, Golden Harvest Inc..
The fabricated slide gate market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Fabricated Slide Gate Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Fabricated Slide Gate Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Fabricated Slide Gate Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Fabricated Slide Gate Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Fabricated Slide Gate Market Size & Forecast, 2020-2028
4.5.1 Fabricated Slide Gate Market Size and Y-o-Y Growth
4.5.2 Fabricated Slide Gate Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Stainless Steel Fabricated Slide Gate
5.2.2 Aluminum Fabricated Slide Gate
5.2.3 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Water Conservancy Project
6.2.2 Hydropower Engineering
6.2.3 Shipping Hub
6.2.4 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Fabricated Slide Gate Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Fabricated Slide Gate Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Stainless Steel Fabricated Slide Gate
9.6.2 Aluminum Fabricated Slide Gate
9.6.3 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Water Conservancy Project
9.10.2 Hydropower Engineering
9.10.3 Shipping Hub
9.10.4 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Stainless Steel Fabricated Slide Gate
10.6.2 Aluminum Fabricated Slide Gate
10.6.3 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Water Conservancy Project
10.10.2 Hydropower Engineering
10.10.3 Shipping Hub
10.10.4 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Stainless Steel Fabricated Slide Gate
11.6.2 Aluminum Fabricated Slide Gate
11.6.3 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Water Conservancy Project
11.10.2 Hydropower Engineering
11.10.3 Shipping Hub
11.10.4 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Stainless Steel Fabricated Slide Gate
12.6.2 Aluminum Fabricated Slide Gate
12.6.3 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Water Conservancy Project
12.10.2 Hydropower Engineering
12.10.3 Shipping Hub
12.10.4 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Stainless Steel Fabricated Slide Gate
13.6.2 Aluminum Fabricated Slide Gate
13.6.3 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Water Conservancy Project
13.10.2 Hydropower Engineering
13.10.3 Shipping Hub
13.10.4 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Fabricated Slide Gate Market: Competitive Dashboard
14.2 Global Fabricated Slide Gate Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Rotolok
14.3.2 Hydro Gate Co
14.3.3 Apollo Valves
14.3.4 Fresno Valves & Castings, Inc.
14.3.5 Waterman Valve LLC
14.3.6 Rodney Hunt
14.3.7 Instream water Control
14.3.8 Mueller Water Products, Inc
14.3.9 Whipps, Inc
14.3.10 Carolina Conveying
14.3.11 Ameristar Fence Products
14.3.12 Alfa Laval Inc
14.3.13 UNICON ENGINEERS
14.3.14 Golden Harvest Inc.
