Market Overview:
The global flat-rolled stainless steel market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for stainless steel from various end-use industries, such as construction, automotive, capital & consumer goods, marine and medical. In terms of type, the hot/cold-rolled coil segment is expected to dominate the global flat-rolled stainless steel market during the forecast period. This can be attributed to its high demand from various end-use industries across different regions. In terms of application, construction is expected to be one of the fastest growing segments in this market during the forecast period.
Product Definition:
A flat-rolled stainless steel product is a thin sheet of metal that has been rolled out, or flattened, from a thicker piece of metal. It is typically used in products such as appliances, automotive parts and construction materials. Flat-rolled stainless steel is important because it is strong and durable, yet also corrosion resistant. This makes it an ideal material for many applications where both strength and corrosion resistance are required.
Hot/Cold-Rolled Coil:
Hot/Cold-Rolled (HCR) coil is a special type of steel coil which is produced by the hot rolling process and then followed by cold rolling. The major difference between these two processes is that in the former, the metal coils are heated to a high temperature so as to make them malleable while they are being rolled; whereas in the latter, they are kept at room temperature after rolling.
Hot/Cold-Rolled Strips:
Hot/Cold-Rolled Stainless Steel is a type of stainless steel that undergoes an additional process to increase its hardness. The process creates two different types of products, i.e., hard and soft (or semi-hard) which are both used in various end-use industries including food packaging, automotive & transportation, appliances and consumer goods among others.
Application Insights:
The construction industry dominated the global flat-rolled stainless steel market, accounting for a revenue share of over 30.0% in 2017. The segment is expected to continue its dominance over the forecast period owing to increasing infrastructure investments across various countries worldwide. For instance, according to the World Bank, around USD 1 trillion needs to be invested globally till 2020 and approximately USD 3 trillion can be safely invested annually from 2016 to 2020 (instructions on how this can be achieved are available at marxistsenatecom). This investment opportunity is likely to provide ample scope for stainless steel manufacturers during the forecast period.
Automotive was another major application segment accounted for in 2017.
Regional Analysis:
Asia Pacific dominated the global flat-rolled stainless steel market in 2017 and is expected to continue its dominance over the forecast period. The region is home to several emerging economies, including China, India, Indonesia and Vietnam. Growing population coupled with rising living standards have spurred the demand for consumer goods in these countries. This has resulted in increased consumption of flat-rolled stainless steel sheets across various applications such as automotive interior panels and construction materials.
Europe accounted for a significant share of global revenue owing to high product penetration in major markets including Germany, U.K., Italy and France among others on account of their well-established automotive & transportation sector along with growing construction industry after experiencing economic downturns over last few years which gave an opportunity for domestic manufacturers like Heraeus Stainless (HTS), Nippon Steel & Sumitomo Metal Corporation (NSSMC) etc.
Growth Factors:
- Increasing demand from end-use industries such as automotive, construction, and appliances
- Growing popularity of stainless steel in the Asia Pacific region
- Rising investment in infrastructure development projects
- Proliferation of advanced manufacturing technologies
- Emergence of new applications for flat-rolled stainless steel
Scope Of The Report
Report Attributes
Report Details
Report Title
Flat-Rolled Stainless Steel Market Research Report
By Type
Hot/Cold-Rolled Coil, Hot/Cold-Rolled Strips, Hot/Cold-Rolled Sheets, Plates, Others
By Application
Construction, Automotive, Capital & Consumer Goods, Marine, Medical
By Companies
ATI (US), Danieli (Italy), Alliance Steel (US), Shah Alloys (India), Yieh Corp (China), Acerinox S.A. (Spain), North American Stainless (US), Metals USA (US), Con-Tech International USA (US), Metalwest (US), ATI (US), Marfin (Italy)
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
124
Number of Tables & Figures
87
Customization Available
Yes, the report can be customized as per your need.
Global Flat-Rolled Stainless Steel Market Report Segments:
The global Flat-Rolled Stainless Steel market is segmented on the basis of:
Types
Hot/Cold-Rolled Coil, Hot/Cold-Rolled Strips, Hot/Cold-Rolled Sheets, Plates, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Construction, Automotive, Capital & Consumer Goods, Marine, Medical
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- ATI (US)
- Danieli (Italy)
- Alliance Steel (US)
- Shah Alloys (India)
- Yieh Corp (China)
- Acerinox S.A. (Spain)
- North American Stainless (US)
- Metals USA (US)
- Con-Tech International USA (US)
- Metalwest (US)
- ATI (US)
- Marfin (Italy)
Highlights of The Flat-Rolled Stainless Steel Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Hot/Cold-Rolled Coil
- Hot/Cold-Rolled Strips
- Hot/Cold-Rolled Sheets
- Plates
- Others
- By Application:
- Construction
- Automotive
- Capital & Consumer Goods
- Marine
- Medical
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Flat-Rolled Stainless Steel Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Flat-rolled stainless steel is a type of stainless steel that has been flattened into a thin sheet. This sheet is then cut into various shapes and sizes, and often used in industrial applications. Flat-rolled stainless steel is less expensive than other types of stainless steel, making it a popular choice for some applications.
Some of the major players in the flat-rolled stainless steel market are ATI (US), Danieli (Italy), Alliance Steel (US), Shah Alloys (India), Yieh Corp (China), Acerinox S.A. (Spain), North American Stainless (US), Metals USA (US), Con-Tech International USA (US), Metalwest (US), ATI (US), Marfin (Italy).
The flat-rolled stainless steel market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Flat-Rolled Stainless Steel Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Flat-Rolled Stainless Steel Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Flat-Rolled Stainless Steel Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Flat-Rolled Stainless Steel Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Flat-Rolled Stainless Steel Market Size & Forecast, 2018-2028
4.5.1 Flat-Rolled Stainless Steel Market Size and Y-o-Y Growth
4.5.2 Flat-Rolled Stainless Steel Market Absolute $ Opportunity
Chapter 5 Global Flat-Rolled Stainless Steel Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Flat-Rolled Stainless Steel Market Size Forecast by Type
5.2.1 Hot/Cold-Rolled Coil
5.2.2 Hot/Cold-Rolled Strips
5.2.3 Hot/Cold-Rolled Sheets
5.2.4 Plates
5.2.5 Others
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Flat-Rolled Stainless Steel Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Flat-Rolled Stainless Steel Market Size Forecast by Applications
6.2.1 Construction
6.2.2 Automotive
6.2.3 Capital & Consumer Goods
6.2.4 Marine
6.2.5 Medical
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Flat-Rolled Stainless Steel Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Flat-Rolled Stainless Steel Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Flat-Rolled Stainless Steel Analysis and Forecast
9.1 Introduction
9.2 North America Flat-Rolled Stainless Steel Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Flat-Rolled Stainless Steel Market Size Forecast by Type
9.6.1 Hot/Cold-Rolled Coil
9.6.2 Hot/Cold-Rolled Strips
9.6.3 Hot/Cold-Rolled Sheets
9.6.4 Plates
9.6.5 Others
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Flat-Rolled Stainless Steel Market Size Forecast by Applications
9.10.1 Construction
9.10.2 Automotive
9.10.3 Capital & Consumer Goods
9.10.4 Marine
9.10.5 Medical
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Flat-Rolled Stainless Steel Analysis and Forecast
10.1 Introduction
10.2 Europe Flat-Rolled Stainless Steel Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Flat-Rolled Stainless Steel Market Size Forecast by Type
10.6.1 Hot/Cold-Rolled Coil
10.6.2 Hot/Cold-Rolled Strips
10.6.3 Hot/Cold-Rolled Sheets
10.6.4 Plates
10.6.5 Others
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Flat-Rolled Stainless Steel Market Size Forecast by Applications
10.10.1 Construction
10.10.2 Automotive
10.10.3 Capital & Consumer Goods
10.10.4 Marine
10.10.5 Medical
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Flat-Rolled Stainless Steel Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Flat-Rolled Stainless Steel Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Flat-Rolled Stainless Steel Market Size Forecast by Type
11.6.1 Hot/Cold-Rolled Coil
11.6.2 Hot/Cold-Rolled Strips
11.6.3 Hot/Cold-Rolled Sheets
11.6.4 Plates
11.6.5 Others
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Flat-Rolled Stainless Steel Market Size Forecast by Applications
11.10.1 Construction
11.10.2 Automotive
11.10.3 Capital & Consumer Goods
11.10.4 Marine
11.10.5 Medical
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Flat-Rolled Stainless Steel Analysis and Forecast
12.1 Introduction
12.2 Latin America Flat-Rolled Stainless Steel Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Flat-Rolled Stainless Steel Market Size Forecast by Type
12.6.1 Hot/Cold-Rolled Coil
12.6.2 Hot/Cold-Rolled Strips
12.6.3 Hot/Cold-Rolled Sheets
12.6.4 Plates
12.6.5 Others
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Flat-Rolled Stainless Steel Market Size Forecast by Applications
12.10.1 Construction
12.10.2 Automotive
12.10.3 Capital & Consumer Goods
12.10.4 Marine
12.10.5 Medical
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Flat-Rolled Stainless Steel Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Flat-Rolled Stainless Steel Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Flat-Rolled Stainless Steel Market Size Forecast by Type
13.6.1 Hot/Cold-Rolled Coil
13.6.2 Hot/Cold-Rolled Strips
13.6.3 Hot/Cold-Rolled Sheets
13.6.4 Plates
13.6.5 Others
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Flat-Rolled Stainless Steel Market Size Forecast by Applications
13.10.1 Construction
13.10.2 Automotive
13.10.3 Capital & Consumer Goods
13.10.4 Marine
13.10.5 Medical
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Flat-Rolled Stainless Steel Market: Competitive Dashboard
14.2 Global Flat-Rolled Stainless Steel Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 ATI (US)
14.3.2 Danieli (Italy)
14.3.3 Alliance Steel (US)
14.3.4 Shah Alloys (India)
14.3.5 Yieh Corp (China)
14.3.6 Acerinox S.A. (Spain)
14.3.7 North American Stainless (US)
14.3.8 Metals USA (US)
14.3.9 Con-Tech International USA (US)
14.3.10 Metalwest (US)
14.3.11 ATI (US)
14.3.12 Marfin (Italy)
