Market Overview:
The Global Fluidized Bed Jet Mill Market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth is attributed to the increasing demand for fluidized bed jet mills in various applications such as chemical industry, medical and health care, mining, food industry and others. In terms of type, the market is segmented into vertical type and horizontal type. The vertical type segment held a larger share of the global market in 2017 and is expected to grow at a higher CAGR during the forecast period. This can be attributed to its ability to handle high-viscosity materials with better efficiency as compared to other types of mills available in the market. Based on application, the global fluidized bed jet mill market is divided into five segments: chemical industry, medical and health care, mining, food industry and other applications.
Product Definition:
A fluidized bed jet mill is a device that uses jets of air to create a "fluidized" bed of material. This device can be used to grind materials into very fine powders.
Vertical Type:
Vertical type is a device used in fluidized bed jet mill for the separation of solid from liquid. It is also known as vertical sieve or tier. Tier consists of perforated metal plates, which are usually arranged in an array and suspended over the jet by means of chains or rods.
Horizontal Type:
Horizontal type is a device that is used to separate the solid from the liquid in fluidized bed jet mills. It works by creating a high velocity stream which helps in flinging the particles towards one side of the chamber and collecting them on other side. Horizontal type has two chambers, one connected by an airtight seal which contains media, and other with screen or mesh attached to it where solid particles are collected.
Application Insights:
The chemical industry accounted for the largest share of over 30% in 2017. The application of fluidized bed jet mills in the chemical industry enables continuous production with high efficiency and energy conservation. Fluidized bed jet mills are used to produce various chemicals such as polymers, resins, dyes, inks and coatings etc. Furthermore, they are also used to produce specialty chemicals such as pharmaceutical intermediates or agricultural products that require a high degree of purity which can be achieved only with this technology.
Fluidized bed jet mill is an ideal technology for producing highly purified product when required quality is more important than quantity (quality over quantity). This has led to its increased adoption across several industries including food & beverage and medical & health care where product purity is crucial or where consistency throughout the process matters most like pharmaceuticals or food processing industries among others.
Regional Analysis:
Asia Pacific dominated the global market in 2017 owing to increasing demand for pharmaceuticals, chemicals, and other products from various end-use industries. The region is expected to witness significant growth over the forecast period on account of rapid industrialization and growing population in countries such as China, India, Indonesia, Vietnam among others.
The chemical industry is one of the major sectors that use fluidized bed technology across several applications. Increasing investments by governments in R&D activities are anticipated to boost product demand across numerous end-use industries such as food & beverage and mining over the next eight years.
North America accounted for a share of more than 15% in terms of revenue generated by fluidized bed jet mills globally due to high product adoption across several applications including chemical manufacturing and metal processing especially during heavy production runs at small scale plants or large volume plants with multiple units/baskets/ovens etc.
Growth Factors:
- Increasing demand for fine and ultrafine powders in various end-use industries
- Growing investments in R&D to develop advanced technologies for milling of finer particles
- Rising popularity of fluidized bed jet mills as a preferred milling technology over other types of mills
- Increasing number of installations across different industrial sectors
- Growing awareness about the benefits offered by fluidized bed jet mills
Scope Of The Report
Report Attributes
Report Details
Report Title
Fluidized Bed Jet Mill Market Research Report
By Type
Vertical Type, Horizontal Type
By Application
Chemical Industry, Medical and Health Care, Mining, Food Industry, Other
By Companies
NETZSCH, Hosakawa-Alpine, UNAQUE, Emco Engineering, Zhengyuan Powder Engineering Equipment, Juzi Power Equipment, JSDL, NETZSCH
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
247
Number of Tables & Figures
173
Customization Available
Yes, the report can be customized as per your need.
Global Fluidized Bed Jet Mill Market Report Segments:
The global Fluidized Bed Jet Mill market is segmented on the basis of:
Types
Vertical Type, Horizontal Type
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Chemical Industry, Medical and Health Care, Mining, Food Industry, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- NETZSCH
- Hosakawa-Alpine
- UNAQUE
- Emco Engineering
- Zhengyuan Powder Engineering Equipment
- Juzi Power Equipment
- JSDL
- NETZSCH
Highlights of The Fluidized Bed Jet Mill Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Vertical Type
- Horizontal Type
- By Application:
- Chemical Industry
- Medical and Health Care
- Mining
- Food Industry
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Fluidized Bed Jet Mill Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A fluidized bed jet mill is a type of industrial grinder that uses jets of high-pressure water to grind materials. The mill can be used to produce a variety of products, including flour, cornstarch, and other food ingredients.
Some of the major companies in the fluidized bed jet mill market are NETZSCH, Hosakawa-Alpine, UNAQUE, Emco Engineering, Zhengyuan Powder Engineering Equipment, Juzi Power Equipment, JSDL, NETZSCH.
The fluidized bed jet mill market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Fluidized Bed Jet Mill Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Fluidized Bed Jet Mill Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Fluidized Bed Jet Mill Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Fluidized Bed Jet Mill Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Fluidized Bed Jet Mill Market Size & Forecast, 2018-2028
4.5.1 Fluidized Bed Jet Mill Market Size and Y-o-Y Growth
4.5.2 Fluidized Bed Jet Mill Market Absolute $ Opportunity
Chapter 5 Global Fluidized Bed Jet Mill Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Fluidized Bed Jet Mill Market Size Forecast by Type
5.2.1 Vertical Type
5.2.2 Horizontal Type
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Fluidized Bed Jet Mill Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Fluidized Bed Jet Mill Market Size Forecast by Applications
6.2.1 Chemical Industry
6.2.2 Medical and Health Care
6.2.3 Mining
6.2.4 Food Industry
6.2.5 Other
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Fluidized Bed Jet Mill Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Fluidized Bed Jet Mill Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Fluidized Bed Jet Mill Analysis and Forecast
9.1 Introduction
9.2 North America Fluidized Bed Jet Mill Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Fluidized Bed Jet Mill Market Size Forecast by Type
9.6.1 Vertical Type
9.6.2 Horizontal Type
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Fluidized Bed Jet Mill Market Size Forecast by Applications
9.10.1 Chemical Industry
9.10.2 Medical and Health Care
9.10.3 Mining
9.10.4 Food Industry
9.10.5 Other
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Fluidized Bed Jet Mill Analysis and Forecast
10.1 Introduction
10.2 Europe Fluidized Bed Jet Mill Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Fluidized Bed Jet Mill Market Size Forecast by Type
10.6.1 Vertical Type
10.6.2 Horizontal Type
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Fluidized Bed Jet Mill Market Size Forecast by Applications
10.10.1 Chemical Industry
10.10.2 Medical and Health Care
10.10.3 Mining
10.10.4 Food Industry
10.10.5 Other
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Fluidized Bed Jet Mill Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Fluidized Bed Jet Mill Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Fluidized Bed Jet Mill Market Size Forecast by Type
11.6.1 Vertical Type
11.6.2 Horizontal Type
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Fluidized Bed Jet Mill Market Size Forecast by Applications
11.10.1 Chemical Industry
11.10.2 Medical and Health Care
11.10.3 Mining
11.10.4 Food Industry
11.10.5 Other
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Fluidized Bed Jet Mill Analysis and Forecast
12.1 Introduction
12.2 Latin America Fluidized Bed Jet Mill Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Fluidized Bed Jet Mill Market Size Forecast by Type
12.6.1 Vertical Type
12.6.2 Horizontal Type
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Fluidized Bed Jet Mill Market Size Forecast by Applications
12.10.1 Chemical Industry
12.10.2 Medical and Health Care
12.10.3 Mining
12.10.4 Food Industry
12.10.5 Other
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Fluidized Bed Jet Mill Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Fluidized Bed Jet Mill Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Fluidized Bed Jet Mill Market Size Forecast by Type
13.6.1 Vertical Type
13.6.2 Horizontal Type
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Fluidized Bed Jet Mill Market Size Forecast by Applications
13.10.1 Chemical Industry
13.10.2 Medical and Health Care
13.10.3 Mining
13.10.4 Food Industry
13.10.5 Other
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Fluidized Bed Jet Mill Market: Competitive Dashboard
14.2 Global Fluidized Bed Jet Mill Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 NETZSCH
14.3.2 Hosakawa-Alpine
14.3.3 UNAQUE
14.3.4 Emco Engineering
14.3.5 Zhengyuan Powder Engineering Equipment
14.3.6 Juzi Power Equipment
14.3.7 JSDL
14.3.8 NETZSCH
