Market Overview:
The global form-in place (FIP) liquid gaskets market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth of the market can be attributed to the increasing demand for electronic equipment, fuel cell assembly, sealed underwater housing, heat sealing, speaker assembly and noise reduction applications across the globe. In addition, the growing awareness about environmental protection is also propelling the demand for form-in place (FIP) liquid gaskets in various end-use industries. Based on type, the global form-in place (FIP) liquid gaskets market can be segmented into UV-curable form in place gaskets and visible light curable form in place gasket segments. The UV-curable FIP liquid Gasket segment is projected to grow at a higher CAGR during the forecast period as compared to other types due to its properties such as high chemical resistance and thermal stability. Based on application,the global FIP Liquid Gasket Market can be divided into six major segments namely electronic equipment; fuel cell assembly; sealed underwater housing; heat sealing; speaker assembly and noise reduction; other applications).
 Liquid Gaskets Industry Outlook.svg)
Product Definition:
A form-in-place (FIP) liquid gasket is a sealing agent that is dispensed in liquid form and then applied to the mating surfaces of the two parts to be sealed. The FIP gasket spreads out and forms a seal between the two surfaces.
The main benefit of using FIP liquid gaskets is that they provide an excellent seal in difficult-to-seal applications, such as those involving irregular or nonparallel surfaces. They are also very effective at filling gaps and can withstand high levels of vibration and shock.
UV-Curable Form in Place Gaskets:
UV-Curable form in place gaskets are used to seal and protect the components of a UV curing resin system. They are available in different forms such as sheets, films, and coatings. The most commonly used product is Polyurethane (PU) based which has high impact resistance along with excellent flexibility and thermal properties making it suitable for use in FIP systems.
Visible Light-Curable Form in Place Gaskets:
Visible light-curable form in place gaskets are used to create and fill liquid gaskets. They can be used with both solvent-based and water-based paints. The visible light source is a lamp, LED or laser diode that illuminates the surface of the liquid gasket to which the material has been applied.
Application Insights:
Electronic equipment was the largest application segment in 2017 and is projected to grow at a CAGR of XX% over the forecast period. The growth can be attributed to increasing demand for electronic devices across the globe. FIP liquid gaskets are used in various applications including fuel cell assembly, heat sealing, speaker assembly and noise reduction, other electronics components packaging etc.
The Asia Pacific region is one of the prominent markets for form-in place liquid gasket market owing to rapid industrialization coupled with rising living standards among its population has led to an increased demand for advanced technology products such as smartphones and laptops among others which further drives product consumption globally.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing region over the forecast period. The growth can be attributed to rising product demand in various applications including electronics, fuel cell, and heat sealing. In addition, increasing foreign investments coupled with favorable government policies are anticipated to drive industrialization across countries such as China and India which will further propel market growth.
The European FIP liquid gasket market was valued at USD X million in 2017 owing to presence of major industry participants along with well-established distribution network for liquid sealants in the region. However, North America is projected to emerge as a promising regional market for form-in place (FIP) liquid gaskets over the forecast period owing to high demand from several end users such as aerospace & defense; automotive; consumer goods; energy & power generation; medical equipment & devices manufacturing companies etc.
Growth Factors:
- Increasing demand for miniaturization in electronic devices
- Growing automotive industry
- Rising demand from the construction and infrastructure sector
- Proliferation of sealing applications in various industries
- Technological advancements
Scope Of The Report
Report Attributes
Report Details
Report Title
Form-in Place (FIP) Liquid Gaskets Market Research Report
By Type
UV-Curable Form in Place Gaskets, Visible Light-Curable Form in Place Gaskets
By Application
Electronic Equipment, Fuel Cell Assembly, Sealed Underwater Housing, Heat Sealing, Speaker Assembly and Noise Reduction, Other
By Companies
Henkel, Dymax Corporation, M, Dow, Wacker Chemie, ThreeBond Group, DELO, Master Bond
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
137
Number of Tables & Figures
96
Customization Available
Yes, the report can be customized as per your need.
Global Form-in Place (FIP) Liquid Gaskets Market Report Segments:
The global Form-in Place (FIP) Liquid Gaskets market is segmented on the basis of:
Types
UV-Curable Form in Place Gaskets, Visible Light-Curable Form in Place Gaskets
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Electronic Equipment, Fuel Cell Assembly, Sealed Underwater Housing, Heat Sealing, Speaker Assembly and Noise Reduction, Other
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Henkel
- Dymax Corporation
- M
- Dow
- Wacker Chemie
- ThreeBond Group
- DELO
- Master Bond
 Liquid Gaskets Market Overview.svg)
Highlights of The Form-in Place (FIP) Liquid Gaskets Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- UV-Curable Form in Place Gaskets
- Visible Light-Curable Form in Place Gaskets
- By Application:
- Electronic Equipment
- Fuel Cell Assembly
- Sealed Underwater Housing
- Heat Sealing
- Speaker Assembly and Noise Reduction
- Other
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Form-in Place (FIP) Liquid Gaskets Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
 Liquid Gaskets Market Statistics.svg)
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Form-in-place (FIP) liquid gaskets are a type of sealant that is used to join two or more pieces of metal. FIP liquid gaskets are applied in a continuous flow and cured by the heat of the metal being joined. This process creates a seal between the pieces that is resistant to leaks and corrosion.
Some of the major players in the form-in place (fip) liquid gaskets market are Henkel, Dymax Corporation, M, Dow, Wacker Chemie, ThreeBond Group, DELO, Master Bond.
The form-in place (fip) liquid gaskets market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Form-in Place (FIP) Liquid Gaskets Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Form-in Place (FIP) Liquid Gaskets Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Form-in Place (FIP) Liquid Gaskets Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Form-in Place (FIP) Liquid Gaskets Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Form-in Place (FIP) Liquid Gaskets Market Size & Forecast, 2020-2028
4.5.1 Form-in Place (FIP) Liquid Gaskets Market Size and Y-o-Y Growth
4.5.2 Form-in Place (FIP) Liquid Gaskets Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 UV-Curable Form in Place Gaskets
5.2.2 Visible Light-Curable Form in Place Gaskets
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Electronic Equipment
6.2.2 Fuel Cell Assembly
6.2.3 Sealed Underwater Housing
6.2.4 Heat Sealing
6.2.5 Speaker Assembly and Noise Reduction
6.2.6 Other
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Form-in Place (FIP) Liquid Gaskets Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Form-in Place (FIP) Liquid Gaskets Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 UV-Curable Form in Place Gaskets
9.6.2 Visible Light-Curable Form in Place Gaskets
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Electronic Equipment
9.10.2 Fuel Cell Assembly
9.10.3 Sealed Underwater Housing
9.10.4 Heat Sealing
9.10.5 Speaker Assembly and Noise Reduction
9.10.6 Other
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 UV-Curable Form in Place Gaskets
10.6.2 Visible Light-Curable Form in Place Gaskets
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Electronic Equipment
10.10.2 Fuel Cell Assembly
10.10.3 Sealed Underwater Housing
10.10.4 Heat Sealing
10.10.5 Speaker Assembly and Noise Reduction
10.10.6 Other
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 UV-Curable Form in Place Gaskets
11.6.2 Visible Light-Curable Form in Place Gaskets
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Electronic Equipment
11.10.2 Fuel Cell Assembly
11.10.3 Sealed Underwater Housing
11.10.4 Heat Sealing
11.10.5 Speaker Assembly and Noise Reduction
11.10.6 Other
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 UV-Curable Form in Place Gaskets
12.6.2 Visible Light-Curable Form in Place Gaskets
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Electronic Equipment
12.10.2 Fuel Cell Assembly
12.10.3 Sealed Underwater Housing
12.10.4 Heat Sealing
12.10.5 Speaker Assembly and Noise Reduction
12.10.6 Other
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 UV-Curable Form in Place Gaskets
13.6.2 Visible Light-Curable Form in Place Gaskets
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Electronic Equipment
13.10.2 Fuel Cell Assembly
13.10.3 Sealed Underwater Housing
13.10.4 Heat Sealing
13.10.5 Speaker Assembly and Noise Reduction
13.10.6 Other
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Form-in Place (FIP) Liquid Gaskets Market: Competitive Dashboard
14.2 Global Form-in Place (FIP) Liquid Gaskets Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Henkel
14.3.2 Dymax Corporation
14.3.3 M
14.3.4 Dow
14.3.5 Wacker Chemie
14.3.6 ThreeBond Group
14.3.7 DELO
14.3.8 Master Bond
