Market Overview:
The global marine pipe floats market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The market growth can be attributed to the increasing demand for dredging, mining, water treatment, and aquaculture applications across the globe. In terms of type, the < 100mm segment is projected to account for a major share of the global marine pipe floats market in 2018. This can be attributed to its low cost and easy installation.
Product Definition:
A marine pipe float is a buoyant device that is used to support the weight of underwater pipeline. It prevents the pipeline from resting on the seabed and damaging it.
< 100mm:
The global marine pipe float market size was valued at USD 1.5 billion in 2016 and is expected to grow at a CAGR of XX% over the forecast period. Increasing demand for oil & gas transportation, coupled with growing exploration activities across the globe, is anticipated to drive growth over the coming years.
Marine pipes are used in offshore oil & gas production facilities as they offer high corrosion resistance and can withstand harsh operating conditions such as high temperature.
100 ~ 200mm:
The 100-200mm range of pipe float is used for floating non-structural and structural components in marine pipes. It helps to prevent damage from occurring due to corrosion or any other cause. The most common application of this product is seen in the oil & gas industry, where it’s used as a protective device between the pipeline and the water surface.
Application Insights:
Dredging was the largest application segment in the global marine pipe floats market and accounted for over 40% of the total revenue share in 2017. The rising need to clear out mud, sand and silt from waterways for navigation as well as provide a smooth flow of water for hydro power generation is expected to drive demand over the forecast period.
The mining segment is anticipated to witness significant growth owing to increasing demand from various sectors such as construction, agriculture, hydropower generation etc. Marine pipes are used extensively in deep-sea mining activities due to their ability of withstanding high pressure without undergoing any structural damage or wear & tear. Moreover, they are also used extensively during agricultural irrigation processes owing to their ability of providing even distribution across large areas which helps farmers increase production significantly resulting in higher product sales at market places etcetera.
Regional Analysis:
Asia Pacific dominated the global marine pipe floats market in 2017 and is expected to continue its dominance over the forecast period. The region is home to some of the major mining countries such as Australia, China, India, and South Africa. In addition, increasing demand for freshwater fish in this region has led to an increase in demand for aquaculture systems which will further drive product growth.
The Asia Pacific regional market was followed by Europe with a share of 24.1%. Countries such as Russia and Norway are known for their extensive coastlinelines that attract dredging activities from time to time; these factors are anticipated to boost product demand over the forecast period.
Growth Factors:
- Increasing demand for marine pipe floats from the oil and gas industry as a result of increasing exploration and production activities
- Rising demand for marine pipe floats from the shipping industry due to growth in global trade
- Growing use of marine pipe floats in offshore construction projects
- Increasing popularity of modular floating systems that employ marine pipe floats as flotation devices
- Technological advancements that have led to the development of more efficient and durable marine pipe floats
Scope Of The Report
Report Attributes
Report Details
Report Title
Marine Pipe Floats Market Research Report
By Type
< 100mm, 100 ~ 200mm, 201 ~ 400mm, 401 ~ 600mm, >600mm
By Application
Dredging, Mining, Water Treatment, Aquaculture, Others
By Companies
Sealite, Coerco, Resinex, KIASMA GROUP, Pipefloats, SUPERIOR PLASTECH, Floatex, Full Oceans, Mobilis, North West Marine, Nautilus Floats, RotoTank, Acu-Tech, Viscount Rotational Mouldings (VRM), SUBSALVE, WSS Marine Offshore, Fibracan, Oztanks, EMSTEC, MMP International, BIS, Bolina Booms
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
248
Number of Tables & Figures
174
Customization Available
Yes, the report can be customized as per your need.
Global Marine Pipe Floats Market Report Segments:
The global Marine Pipe Floats market is segmented on the basis of:
Types
< 100mm, 100 ~ 200mm, 201 ~ 400mm, 401 ~ 600mm, >600mm
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Dredging, Mining, Water Treatment, Aquaculture, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Sealite
- Coerco
- Resinex
- KIASMA GROUP
- Pipefloats
- SUPERIOR PLASTECH
- Floatex
- Full Oceans
- Mobilis
- North West Marine
- Nautilus Floats
- RotoTank
- Acu-Tech
- Viscount Rotational Mouldings (VRM)
- SUBSALVE
- WSS Marine Offshore
- Fibracan
- Oztanks
- EMSTEC
- MMP International
- BIS
- Bolina Booms
Highlights of The Marine Pipe Floats Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- < 100mm
- 100 ~ 200mm
- 201 ~ 400mm
- 401 ~ 600mm
- >600mm
- By Application:
- Dredging
- Mining
- Water Treatment
- Aquaculture
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Marine Pipe Floats Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Marine pipe floats are a type of buoyant device used to measure water depth. They consist of a cylindrical tube filled with air or gas, and attached to a float. When the float is submerged in water, the buoyancy forces push the tube up and out of the water, allowing it to be measured.
Some of the major companies in the marine pipe floats market are Sealite, Coerco, Resinex, KIASMA GROUP, Pipefloats, SUPERIOR PLASTECH, Floatex, Full Oceans, Mobilis, North West Marine, Nautilus Floats, RotoTank, Acu-Tech, Viscount Rotational Mouldings (VRM), SUBSALVE, WSS Marine Offshore, Fibracan, Oztanks, EMSTEC, MMP International, BIS, Bolina Booms.
The marine pipe floats market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Marine Pipe Floats Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Marine Pipe Floats Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Marine Pipe Floats Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Marine Pipe Floats Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Marine Pipe Floats Market Size & Forecast, 2020-2028
4.5.1 Marine Pipe Floats Market Size and Y-o-Y Growth
4.5.2 Marine Pipe Floats Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 < 100mm
5.2.2 100 ~ 200mm
5.2.3 201 ~ 400mm
5.2.4 401 ~ 600mm
5.2.5 >600mm
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Dredging
6.2.2 Mining
6.2.3 Water Treatment
6.2.4 Aquaculture
6.2.5 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Marine Pipe Floats Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Marine Pipe Floats Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 < 100mm
9.6.2 100 ~ 200mm
9.6.3 201 ~ 400mm
9.6.4 401 ~ 600mm
9.6.5 >600mm
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Dredging
9.10.2 Mining
9.10.3 Water Treatment
9.10.4 Aquaculture
9.10.5 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 < 100mm
10.6.2 100 ~ 200mm
10.6.3 201 ~ 400mm
10.6.4 401 ~ 600mm
10.6.5 >600mm
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Dredging
10.10.2 Mining
10.10.3 Water Treatment
10.10.4 Aquaculture
10.10.5 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 < 100mm
11.6.2 100 ~ 200mm
11.6.3 201 ~ 400mm
11.6.4 401 ~ 600mm
11.6.5 >600mm
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Dredging
11.10.2 Mining
11.10.3 Water Treatment
11.10.4 Aquaculture
11.10.5 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 < 100mm
12.6.2 100 ~ 200mm
12.6.3 201 ~ 400mm
12.6.4 401 ~ 600mm
12.6.5 >600mm
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Dredging
12.10.2 Mining
12.10.3 Water Treatment
12.10.4 Aquaculture
12.10.5 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 < 100mm
13.6.2 100 ~ 200mm
13.6.3 201 ~ 400mm
13.6.4 401 ~ 600mm
13.6.5 >600mm
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Dredging
13.10.2 Mining
13.10.3 Water Treatment
13.10.4 Aquaculture
13.10.5 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Marine Pipe Floats Market: Competitive Dashboard
14.2 Global Marine Pipe Floats Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Sealite
14.3.2 Coerco
14.3.3 Resinex
14.3.4 KIASMA GROUP
14.3.5 Pipefloats
14.3.6 SUPERIOR PLASTECH
14.3.7 Floatex
14.3.8 Full Oceans
14.3.9 Mobilis
14.3.10 North West Marine
14.3.11 Nautilus Floats
14.3.12 RotoTank
14.3.13 Acu-Tech
14.3.14 Viscount Rotational Mouldings (VRM)
14.3.15 SUBSALVE
14.3.16 WSS Marine Offshore
14.3.17 Fibracan
14.3.18 Oztanks
14.3.19 EMSTEC
14.3.20 MMP International
14.3.21 BIS
14.3.22 Bolina Booms
