Market Overview:
The global piping and fittings market is expected to grow at a CAGR of 5.5% from 2018 to 2030. The growth in the market can be attributed to the increasing demand for household appliances and industrial appliances across the globe. Steel pipe is the most commonly used type of piping and fittings, owing to its properties such as high strength-to-weight ratio, corrosion resistance, and durability. Copper pipe is also gaining popularity due to its properties such as high thermal conductivity and malleability. Aluminum pipe is being increasingly used in plumbing systems owing to its lightweight nature and corrosion resistance properties. Glass pipes are mainly used in decorative applications owing to their aesthetic appeal. Plastic pipes are widely used for water supply systems as they are non-toxic, lightweight, durable, and economical.
Product Definition:
Piping and fittings are the components that make up a piping system. Piping is the tubing through which fluid flows, while fittings connect and join pipes together. Piping systems are used to convey water, oil, gas, air and other fluids. Piping and fittings are important because they allow us to safely transport these fluids from one place to another.
Steel Pipe:
Steel pipe is a type of steel tubing, which is widely used in the plumbing industry for various applications such as water distribution and plumbing fittings. It can also be used for gas transmission because of its high strength. Steel pipes are available in different sizes ranging from 1/4” to 24” and are easily installed by simply tapping into place with a mallet or screw driver.
Copper Pipe:
Copper pipe is a alloy of copper and other metals such as tin, aluminum or brass. It has wide application in plumbing fittings used for household and commercial purposes. Copper piping systems are widely used in HVAC applications owing to its characteristics including corrosion resistance, high strength, low weight & cost and easy installation.
Application Insights:
The household appliances segment accounted for the largest revenue share of over 40% in 2017. The growth can be attributed to increasing demand from residential areas and rising construction activities in emerging economies including China, India, Brazil and Mexico. In addition, growing product penetration for water supply systems is expected to drive demand over the forecast period.
Regional Analysis:
Asia Pacific was the leading regional market in 2017 and is expected to continue its dominance over the forecast period. The region has been witnessing rapid growth in industrialization, primarily manufacturing, which requires piping systems for transfer of fluids and chemicals. This is anticipated to drive product demand over the forecast period.
The Asia Pacific market was followed by Europe owing to increasing use of piping systems in various industries including oil & gas, power generation, food processing and pharmaceuticals among others across countries such as Russia, Germany France Italy U.K.
Growth Factors:
- Increasing demand from the construction and infrastructure sectors
- Growing demand for piping and fittings in the oil and gas industry
- Rising popularity of plastic piping systems over traditional metal pipes
- Technological advancements in the manufacturing of piping and fittings products
- Growing awareness about energy-efficient plumbing systems
Scope Of The Report
Report Attributes
Report Details
Report Title
Piping and Fittings Market Research Report
By Type
Steel Pipe, Copper Pipe, Aluminum Pipe, Glass Pipe, Plastic Pipe, Polyvinyl Chloride Pipe
By Application
Household Appliances, Industrial Appliances
By Companies
Saint-Gobain, Grohe, Jaquar, Kohler, Hindustan Sanitaryware and Industries, Aliaxis, Alumasc Building Products, Aluminum Roofline Products, Amazon Civils, Anglian Home Improvements, Saint-Gobain, Marley Plumbing & Drainage, Pegler Yorkshire, PF Copeland Rainwater Systems
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
226
Number of Tables & Figures
159
Customization Available
Yes, the report can be customized as per your need.
Global Piping and Fittings Market Report Segments:
The global Piping and Fittings market is segmented on the basis of:
Types
Steel Pipe, Copper Pipe, Aluminum Pipe, Glass Pipe, Plastic Pipe, Polyvinyl Chloride Pipe
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Household Appliances, Industrial Appliances
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Saint-Gobain
- Grohe
- Jaquar
- Kohler
- Hindustan Sanitaryware and Industries
- Aliaxis
- Alumasc Building Products
- Aluminum Roofline Products
- Amazon Civils
- Anglian Home Improvements
- Saint-Gobain
- Marley Plumbing & Drainage
- Pegler Yorkshire
- PF Copeland Rainwater Systems
Highlights of The Piping and Fittings Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Steel Pipe
- Copper Pipe
- Aluminum Pipe
- Glass Pipe
- Plastic Pipe
- Polyvinyl Chloride Pipe
- By Application:
- Household Appliances
- Industrial Appliances
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Piping and Fittings Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Piping and fittings are the components of a plumbing system that allow water, gas, oil, or other fluids to be transported from one place to another. Piping systems can be simple or complex, depending on the needs of the application.
Some of the key players operating in the piping and fittings market are Saint-Gobain, Grohe, Jaquar, Kohler, Hindustan Sanitaryware and Industries, Aliaxis, Alumasc Building Products, Aluminum Roofline Products, Amazon Civils, Anglian Home Improvements, Saint-Gobain, Marley Plumbing & Drainage, Pegler Yorkshire, PF Copeland Rainwater Systems.
The piping and fittings market is expected to grow at a compound annual growth rate of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Piping and Fittings Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Piping and Fittings Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Piping and Fittings Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Piping and Fittings Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Piping and Fittings Market Size & Forecast, 2020-2028
4.5.1 Piping and Fittings Market Size and Y-o-Y Growth
4.5.2 Piping and Fittings Market Absolute $ Opportunity
Chapter 5 Global Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Market Size Forecast by Type
5.2.1 Steel Pipe
5.2.2 Copper Pipe
5.2.3 Aluminum Pipe
5.2.4 Glass Pipe
5.2.5 Plastic Pipe
5.2.6 Polyvinyl Chloride Pipe
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Market Size Forecast by Applications
6.2.1 Household Appliances
6.2.2 Industrial Appliances
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Piping and Fittings Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Piping and Fittings Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Analysis and Forecast
9.1 Introduction
9.2 North America Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Market Size Forecast by Type
9.6.1 Steel Pipe
9.6.2 Copper Pipe
9.6.3 Aluminum Pipe
9.6.4 Glass Pipe
9.6.5 Plastic Pipe
9.6.6 Polyvinyl Chloride Pipe
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Market Size Forecast by Applications
9.10.1 Household Appliances
9.10.2 Industrial Appliances
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Analysis and Forecast
10.1 Introduction
10.2 Europe Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Market Size Forecast by Type
10.6.1 Steel Pipe
10.6.2 Copper Pipe
10.6.3 Aluminum Pipe
10.6.4 Glass Pipe
10.6.5 Plastic Pipe
10.6.6 Polyvinyl Chloride Pipe
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Market Size Forecast by Applications
10.10.1 Household Appliances
10.10.2 Industrial Appliances
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Market Size Forecast by Type
11.6.1 Steel Pipe
11.6.2 Copper Pipe
11.6.3 Aluminum Pipe
11.6.4 Glass Pipe
11.6.5 Plastic Pipe
11.6.6 Polyvinyl Chloride Pipe
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Market Size Forecast by Applications
11.10.1 Household Appliances
11.10.2 Industrial Appliances
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Analysis and Forecast
12.1 Introduction
12.2 Latin America Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Market Size Forecast by Type
12.6.1 Steel Pipe
12.6.2 Copper Pipe
12.6.3 Aluminum Pipe
12.6.4 Glass Pipe
12.6.5 Plastic Pipe
12.6.6 Polyvinyl Chloride Pipe
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Market Size Forecast by Applications
12.10.1 Household Appliances
12.10.2 Industrial Appliances
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Market Size Forecast by Type
13.6.1 Steel Pipe
13.6.2 Copper Pipe
13.6.3 Aluminum Pipe
13.6.4 Glass Pipe
13.6.5 Plastic Pipe
13.6.6 Polyvinyl Chloride Pipe
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Market Size Forecast by Applications
13.10.1 Household Appliances
13.10.2 Industrial Appliances
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Piping and Fittings Market: Competitive Dashboard
14.2 Global Piping and Fittings Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Saint-Gobain
14.3.2 Grohe
14.3.3 Jaquar
14.3.4 Kohler
14.3.5 Hindustan Sanitaryware and Industries
14.3.6 Aliaxis
14.3.7 Alumasc Building Products
14.3.8 Aluminum Roofline Products
14.3.9 Amazon Civils
14.3.10 Anglian Home Improvements
14.3.11 Saint-Gobain
14.3.12 Marley Plumbing & Drainage
14.3.13 Pegler Yorkshire
14.3.14 PF Copeland Rainwater Systems
