Market Overview:
The global pump rotor market is expected to grow at a CAGR of 5.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for energy and chemicals, rising construction activities, and growing electronics industry. In terms of type, the single-start rotor segment is expected to lead the global pump rotor market during the forecast period. This can be attributed to its low cost and easy installation as compared to other types of rotors. In terms of application, the energy industry segment is expected to lead the global pump rotor market during the forecast period.
Product Definition:
Pump rotor is the rotating part of a pump that drives the fluid through the pump. The pump rotor is typically a impeller, which is attached to a shaft that spins inside the casing of the pump.
Single‑start Rotors:
Single start rotors are the most basic form of pump rotor. It is a one–piece casting, which has cut away at both ends to provide clearance for the stator windings. The shape of single start rotor provides maximum surface area in contact with the fluid, and this results in higher efficiency as compared to other types of rotors.
The growth factor that drives demand for single start pumps is their low maintenance cost.
Double-start Rotors:
Double-start rotors are two interlocking rotating drums with teeth on the outer surface. The pump rotor is used in centrifugal and axial pumps to impart radial force, or torque, to the fluid flow. In a double-start rotor design, there are two sets of teeth on each drum; one set of teeth is facing forward and another set of teeth is facing backward.
Application Insights:
The energy industry segment accounted for the largest market share in 2017 and is projected to expand at a CAGR of XX% over the forecast period. The rising demand for electric power generated through renewable sources, such as wind and solar energy, is anticipated to drive product demand in this application segment over the coming years.
Increasing investments by governments across various countries in order to develop new sources of non-fossil fuel based electricity generation are expected to boost pump rotor production over the forecast period. In addition, technological advancements coupled with increasing efficiency levels are projected to further propel market growth during this period.
Regional Analysis:
North America dominated the global market in 2017 owing to the presence of a large number of industrial and commercial establishments, coupled with high electricity consumption per establishment. The region is expected to witness moderate growth over the forecast period.
The Asia Pacific regional market is anticipated to grow at a significant rate over the forecast period owing to increasing demand for pumps in various industrial applications such as water treatment, oil & gas exploration and production, food processing and others. In addition, rising construction activities due to government initiatives such as “Housing for All†program by India's prime minister Narendra Modi are expected drive product demand in this region.
Europe accounted for more than 20% share of total revenue in 2017 on account of growing application scope across several industries including energy industry, chemicals industry and electronics industry that require continuous lubrication system maintenance at different intervals along with periodic starting operations.
Growth Factors:
- Increasing demand for energy efficient and reliable equipment
- Rising industrialization and urbanization in developing countries
- Technological advancements in pump rotor design and manufacturing processes
- Growing awareness about the benefits of using pump rotors for various applications
- Stringent government regulations to promote the use of energy-efficient equipment
Scope Of The Report
Report Attributes
Report Details
Report Title
Pump Rotor Market Research Report
By Type
Single‑start Rotors, Double-start Rotors, Multi-start Rotors
By Application
Energy Industry, Chemicals, Construction, Electronics Industry, Others
By Companies
ITT, Roto Pumps, HyFlex, Soltec, AUTANIA AG, Sulzer, TechnipFMC, General Electric Company, SPS Pumps sa-nv, Subtor
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
159
Number of Tables & Figures
112
Customization Available
Yes, the report can be customized as per your need.
Global Pump Rotor Market Report Segments:
The global Pump Rotor market is segmented on the basis of:
Types
Single‑start Rotors, Double-start Rotors, Multi-start Rotors
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Energy Industry, Chemicals, Construction, Electronics Industry, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- ITT
- Roto Pumps
- HyFlex
- Soltec
- AUTANIA AG
- Sulzer
- TechnipFMC
- General Electric Company
- SPS Pumps sa-nv
- Subtor
Highlights of The Pump Rotor Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Single‑start Rotors
- Double-start Rotors
- Multi-start Rotors
- By Application:
- Energy Industry
- Chemicals
- Construction
- Electronics Industry
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Pump Rotor Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
A pump rotor is a component of a pump that helps to move fluid through the system. It is typically made out of metal and has several blades that rotate to create motion.
Some of the key players operating in the pump rotor market are ITT, Roto Pumps, HyFlex, Soltec, AUTANIA AG, Sulzer, TechnipFMC, General Electric Company, SPS Pumps sa-nv, Subtor.
The pump rotor market is expected to register a CAGR of 5.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Pump Rotor Market Overview 4.1 Introduction 4.1.1 Market Taxonomy 4.1.2 Market Definition 4.1.3 Macro-Economic Factors Impacting the Market Growth 4.2 Pump Rotor Market Dynamics 4.2.1 Market Drivers 4.2.2 Market Restraints 4.2.3 Market Opportunity 4.3 Pump Rotor Market - Supply Chain Analysis 4.3.1 List of Key Suppliers 4.3.2 List of Key Distributors 4.3.3 List of Key Consumers 4.4 Key Forces Shaping the Pump Rotor Market 4.4.1 Bargaining Power of Suppliers 4.4.2 Bargaining Power of Buyers 4.4.3 Threat of Substitution 4.4.4 Threat of New Entrants 4.4.5 Competitive Rivalry 4.5 Global Pump Rotor Market Size & Forecast, 2018-2028 4.5.1 Pump Rotor Market Size and Y-o-Y Growth 4.5.2 Pump Rotor Market Absolute $ Opportunity
Chapter 5 Global Pump Rotor Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Pump Rotor Market Size Forecast by Type
5.2.1 Single‑start Rotors
5.2.2 Double-start Rotors
5.2.3 Multi-start Rotors
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Pump Rotor Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Pump Rotor Market Size Forecast by Applications
6.2.1 Energy Industry
6.2.2 Chemicals
6.2.3 Construction
6.2.4 Electronics Industry
6.2.5 Others
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Pump Rotor Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Pump Rotor Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Pump Rotor Analysis and Forecast
9.1 Introduction
9.2 North America Pump Rotor Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Pump Rotor Market Size Forecast by Type
9.6.1 Single‑start Rotors
9.6.2 Double-start Rotors
9.6.3 Multi-start Rotors
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Pump Rotor Market Size Forecast by Applications
9.10.1 Energy Industry
9.10.2 Chemicals
9.10.3 Construction
9.10.4 Electronics Industry
9.10.5 Others
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Pump Rotor Analysis and Forecast
10.1 Introduction
10.2 Europe Pump Rotor Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Pump Rotor Market Size Forecast by Type
10.6.1 Single‑start Rotors
10.6.2 Double-start Rotors
10.6.3 Multi-start Rotors
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Pump Rotor Market Size Forecast by Applications
10.10.1 Energy Industry
10.10.2 Chemicals
10.10.3 Construction
10.10.4 Electronics Industry
10.10.5 Others
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Pump Rotor Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Pump Rotor Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Pump Rotor Market Size Forecast by Type
11.6.1 Single‑start Rotors
11.6.2 Double-start Rotors
11.6.3 Multi-start Rotors
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Pump Rotor Market Size Forecast by Applications
11.10.1 Energy Industry
11.10.2 Chemicals
11.10.3 Construction
11.10.4 Electronics Industry
11.10.5 Others
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Pump Rotor Analysis and Forecast
12.1 Introduction
12.2 Latin America Pump Rotor Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Pump Rotor Market Size Forecast by Type
12.6.1 Single‑start Rotors
12.6.2 Double-start Rotors
12.6.3 Multi-start Rotors
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Pump Rotor Market Size Forecast by Applications
12.10.1 Energy Industry
12.10.2 Chemicals
12.10.3 Construction
12.10.4 Electronics Industry
12.10.5 Others
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Pump Rotor Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Pump Rotor Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Pump Rotor Market Size Forecast by Type
13.6.1 Single‑start Rotors
13.6.2 Double-start Rotors
13.6.3 Multi-start Rotors
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Pump Rotor Market Size Forecast by Applications
13.10.1 Energy Industry
13.10.2 Chemicals
13.10.3 Construction
13.10.4 Electronics Industry
13.10.5 Others
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Pump Rotor Market: Competitive Dashboard
14.2 Global Pump Rotor Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 ITT
14.3.2 Roto Pumps
14.3.3 HyFlex
14.3.4 Soltec
14.3.5 AUTANIA AG
14.3.6 Sulzer
14.3.7 TechnipFMC
14.3.8 General Electric Company
14.3.9 SPS Pumps sa-nv
14.3.10 Subtor