Market Overview:
The global ultra-thin heat pipes market is expected to grow at a CAGR of 7.5% during the forecast period from 2018 to 2030. The growth in this market can be attributed to the increasing demand for miniaturized and energy-efficient devices, especially in the consumer electronics and automotive industries. Additionally, the growing adoption of LED lighting is also contributing to the growth of this market. The global ultra-thin heat pipes market can be segmented on the basis of type into round heat pipes and flat heat pipes. On the basis of application, this market can be segmented into auto industry, consumer electronics, medical devices, and LED lighting.
Product Definition:
Ultra-thin heat pipes are a type of thermal management device that is used to transfer heat away from electronic components. These devices are typically made from metal alloys and have a diameter that is less than one millimeter. They are important because they can be used to cool down small components, such as microprocessors, without taking up a lot of space.
Round Heat Pipe:
The round heat pipe is a device that extracts heat from an inner to an outer surface and dissipates it into the environment. It consists of two concentric tubes joined by a narrow neck, which allows hot gases to pass through while allowing liquid to flow. The design provides maximum thermal efficiency as there is no wasted space between the inner and outer surfaces of the tube.
Flat Heat Pipe:
Flat heat pipe is a device that is used to transfer heat from one place to another with the least possible loss. It consists of two metal plates joined by a thin layer of material such as aluminum or copper. The space between the plates acts as thermal conductor and allows heat to move easily from one plate to other.
The working principle of flat heat pipe is based on Conduction, Convection and Radiation (CCR).
Application Insights:
The automotive application segment accounted for the largest share of over 30.0% in 2017. The growing use of UTHPs in various components including engine, transmission and brake system is expected to drive the demand over the forecast period. Furthermore, technological advancements such as round UTHP are being replaced by flat type which offer better heat transfer characteristics and are thus widely used in automobile industry owing to its increasing demand for fuel efficiency along with reduced emissions.
Ultra-thin pipes have a wide range of applications across several end-use industries including LED lighting, medical equipment & devices manufacturing, HVAC (heating ventilation air conditioning), industrial machinery & tools manufacturing and other electronics products such as mobile phones etc., among others.
Regional Analysis:
Asia Pacific is expected to be the fastest-growing regional market with a CAGR of XX% from 2018 to 2030 owing to increasing demand for automobiles in China and India. In addition, rising living standards and growing population are likely to boost product demand in this region. Furthermore, rapid industrialization along with government initiatives towards infrastructure development is projected to drive the heat pipes market over the forecast period.
North America accounted for a significant share of global ultra-thin heat pipes industry on account of high automobile production coupled with technological advancements in automotive engineering practices across various countries including Mexico, Canada, and U.S., which has resulted into increased utilization of advanced materials such as Teflon© etc.
Growth Factors:
- Increasing demand for miniaturization in electronics industry
- Rising trend of thermal management in various industries
- Growing popularity of ultra-thin heat pipes among consumers and OEMs
- Technological advancements in the manufacturing process of ultra-thin heat pipes 5. Rising awareness about the benefits of using ultra-thin heat pipes
Scope Of The Report
Report Attributes
Report Details
Report Title
Ultra-Thin Heat Pipes Market Research Report
By Type
Round Heat Pipe, Flat Heat Pipe
By Application
Auto Industry, Consumer Electronics, Medical, LED Lighting
By Companies
Wakefield Thermal Solutions, Inc., Furukawa, Boyd Corporation, Columbia Staver Ltd, Fujikura Ltd., Delta Electronics, AMEC Thermasol, Novark Technologies, Suzhou Hemi Electronics, Guangdong Newidea Technology Co., Ltd., Wakefield Thermal Solutions, Inc.
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
159
Number of Tables & Figures
112
Customization Available
Yes, the report can be customized as per your need.
Global Ultra-Thin Heat Pipes Market Report Segments:
The global Ultra-Thin Heat Pipes market is segmented on the basis of:
Types
Round Heat Pipe, Flat Heat Pipe
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Auto Industry, Consumer Electronics, Medical, LED Lighting
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Wakefield Thermal Solutions, Inc.
- Furukawa
- Boyd Corporation
- Columbia Staver Ltd
- Fujikura Ltd.
- Delta Electronics
- AMEC Thermasol
- Novark Technologies
- Suzhou Hemi Electronics
- Guangdong Newidea Technology Co., Ltd.
- Wakefield Thermal Solutions, Inc.
Highlights of The Ultra-Thin Heat Pipes Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Round Heat Pipe
- Flat Heat Pipe
- By Application:
- Auto Industry
- Consumer Electronics
- Medical
- LED Lighting
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Ultra-Thin Heat Pipes Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Ultra-Thin Heat Pipes are a new type of heat pipe that is much thinner than traditional heat pipes. They are also made from a different material than traditional heat pipes, which makes them more durable and less likely to break.
Some of the major players in the ultra-thin heat pipes market are Wakefield Thermal Solutions, Inc., Furukawa, Boyd Corporation, Columbia Staver Ltd, Fujikura Ltd., Delta Electronics, AMEC Thermasol, Novark Technologies, Suzhou Hemi Electronics, Guangdong Newidea Technology Co., Ltd., Wakefield Thermal Solutions, Inc..
The ultra-thin heat pipes market is expected to grow at a compound annual growth rate of 7.5%.
Chapter 1 Executive Summary
Chapter 2 Assumptions and Acronyms Used
Chapter 3 Research Methodology
Chapter 4 Ultra-Thin Heat Pipes Market Overview
4.1 Introduction
4.1.1 Market Taxonomy
4.1.2 Market Definition
4.1.3 Macro-Economic Factors Impacting the Market Growth
4.2 Ultra-Thin Heat Pipes Market Dynamics
4.2.1 Market Drivers
4.2.2 Market Restraints
4.2.3 Market Opportunity
4.3 Ultra-Thin Heat Pipes Market - Supply Chain Analysis
4.3.1 List of Key Suppliers
4.3.2 List of Key Distributors
4.3.3 List of Key Consumers
4.4 Key Forces Shaping the Ultra-Thin Heat Pipes Market
4.4.1 Bargaining Power of Suppliers
4.4.2 Bargaining Power of Buyers
4.4.3 Threat of Substitution
4.4.4 Threat of New Entrants
4.4.5 Competitive Rivalry
4.5 Global Ultra-Thin Heat Pipes Market Size & Forecast, 2018-2028
4.5.1 Ultra-Thin Heat Pipes Market Size and Y-o-Y Growth
4.5.2 Ultra-Thin Heat Pipes Market Absolute $ Opportunity
Chapter 5 Global Ultra-Thin Heat Pipes Market Analysis and Forecast by Type
5.1 Introduction
5.1.1 Key Market Trends & Growth Opportunities by Type
5.1.2 Basis Point Share (BPS) Analysis by Type
5.1.3 Absolute $ Opportunity Assessment by Type
5.2 Ultra-Thin Heat Pipes Market Size Forecast by Type
5.2.1 Round Heat Pipe
5.2.2 Flat Heat Pipe
5.3 Market Attractiveness Analysis by Type
Chapter 6 Global Ultra-Thin Heat Pipes Market Analysis and Forecast by Applications
6.1 Introduction
6.1.1 Key Market Trends & Growth Opportunities by Applications
6.1.2 Basis Point Share (BPS) Analysis by Applications
6.1.3 Absolute $ Opportunity Assessment by Applications
6.2 Ultra-Thin Heat Pipes Market Size Forecast by Applications
6.2.1 Auto Industry
6.2.2 Consumer Electronics
6.2.3 Medical
6.2.4 LED Lighting
6.3 Market Attractiveness Analysis by Applications
Chapter 7 Global Ultra-Thin Heat Pipes Market Analysis and Forecast by Region
7.1 Introduction
7.1.1 Key Market Trends & Growth Opportunities by Region
7.1.2 Basis Point Share (BPS) Analysis by Region
7.1.3 Absolute $ Opportunity Assessment by Region
7.2 Ultra-Thin Heat Pipes Market Size Forecast by Region
7.2.1 North America
7.2.2 Europe
7.2.3 Asia Pacific
7.2.4 Latin America
7.2.5 Middle East & Africa (MEA)
7.3 Market Attractiveness Analysis by Region
Chapter 8 Coronavirus Disease (COVID-19) Impact
8.1 Introduction
8.2 Current & Future Impact Analysis
8.3 Economic Impact Analysis
8.4 Government Policies
8.5 Investment Scenario
Chapter 9 North America Ultra-Thin Heat Pipes Analysis and Forecast
9.1 Introduction
9.2 North America Ultra-Thin Heat Pipes Market Size Forecast by Country
9.2.1 U.S.
9.2.2 Canada
9.3 Basis Point Share (BPS) Analysis by Country
9.4 Absolute $ Opportunity Assessment by Country
9.5 Market Attractiveness Analysis by Country
9.6 North America Ultra-Thin Heat Pipes Market Size Forecast by Type
9.6.1 Round Heat Pipe
9.6.2 Flat Heat Pipe
9.7 Basis Point Share (BPS) Analysis by Type
9.8 Absolute $ Opportunity Assessment by Type
9.9 Market Attractiveness Analysis by Type
9.10 North America Ultra-Thin Heat Pipes Market Size Forecast by Applications
9.10.1 Auto Industry
9.10.2 Consumer Electronics
9.10.3 Medical
9.10.4 LED Lighting
9.11 Basis Point Share (BPS) Analysis by Applications
9.12 Absolute $ Opportunity Assessment by Applications
9.13 Market Attractiveness Analysis by Applications
Chapter 10 Europe Ultra-Thin Heat Pipes Analysis and Forecast
10.1 Introduction
10.2 Europe Ultra-Thin Heat Pipes Market Size Forecast by Country
10.2.1 Germany
10.2.2 France
10.2.3 Italy
10.2.4 U.K.
10.2.5 Spain
10.2.6 Russia
10.2.7 Rest of Europe
10.3 Basis Point Share (BPS) Analysis by Country
10.4 Absolute $ Opportunity Assessment by Country
10.5 Market Attractiveness Analysis by Country
10.6 Europe Ultra-Thin Heat Pipes Market Size Forecast by Type
10.6.1 Round Heat Pipe
10.6.2 Flat Heat Pipe
10.7 Basis Point Share (BPS) Analysis by Type
10.8 Absolute $ Opportunity Assessment by Type
10.9 Market Attractiveness Analysis by Type
10.10 Europe Ultra-Thin Heat Pipes Market Size Forecast by Applications
10.10.1 Auto Industry
10.10.2 Consumer Electronics
10.10.3 Medical
10.10.4 LED Lighting
10.11 Basis Point Share (BPS) Analysis by Applications
10.12 Absolute $ Opportunity Assessment by Applications
10.13 Market Attractiveness Analysis by Applications
Chapter 11 Asia Pacific Ultra-Thin Heat Pipes Analysis and Forecast
11.1 Introduction
11.2 Asia Pacific Ultra-Thin Heat Pipes Market Size Forecast by Country
11.2.1 China
11.2.2 Japan
11.2.3 South Korea
11.2.4 India
11.2.5 Australia
11.2.6 South East Asia (SEA)
11.2.7 Rest of Asia Pacific (APAC)
11.3 Basis Point Share (BPS) Analysis by Country
11.4 Absolute $ Opportunity Assessment by Country
11.5 Market Attractiveness Analysis by Country
11.6 Asia Pacific Ultra-Thin Heat Pipes Market Size Forecast by Type
11.6.1 Round Heat Pipe
11.6.2 Flat Heat Pipe
11.7 Basis Point Share (BPS) Analysis by Type
11.8 Absolute $ Opportunity Assessment by Type
11.9 Market Attractiveness Analysis by Type
11.10 Asia Pacific Ultra-Thin Heat Pipes Market Size Forecast by Applications
11.10.1 Auto Industry
11.10.2 Consumer Electronics
11.10.3 Medical
11.10.4 LED Lighting
11.11 Basis Point Share (BPS) Analysis by Applications
11.12 Absolute $ Opportunity Assessment by Applications
11.13 Market Attractiveness Analysis by Applications
Chapter 12 Latin America Ultra-Thin Heat Pipes Analysis and Forecast
12.1 Introduction
12.2 Latin America Ultra-Thin Heat Pipes Market Size Forecast by Country
12.2.1 Brazil
12.2.2 Mexico
12.2.3 Rest of Latin America (LATAM)
12.3 Basis Point Share (BPS) Analysis by Country
12.4 Absolute $ Opportunity Assessment by Country
12.5 Market Attractiveness Analysis by Country
12.6 Latin America Ultra-Thin Heat Pipes Market Size Forecast by Type
12.6.1 Round Heat Pipe
12.6.2 Flat Heat Pipe
12.7 Basis Point Share (BPS) Analysis by Type
12.8 Absolute $ Opportunity Assessment by Type
12.9 Market Attractiveness Analysis by Type
12.10 Latin America Ultra-Thin Heat Pipes Market Size Forecast by Applications
12.10.1 Auto Industry
12.10.2 Consumer Electronics
12.10.3 Medical
12.10.4 LED Lighting
12.11 Basis Point Share (BPS) Analysis by Applications
12.12 Absolute $ Opportunity Assessment by Applications
12.13 Market Attractiveness Analysis by Applications
Chapter 13 Middle East & Africa (MEA) Ultra-Thin Heat Pipes Analysis and Forecast
13.1 Introduction
13.2 Middle East & Africa (MEA) Ultra-Thin Heat Pipes Market Size Forecast by Country
13.2.1 Saudi Arabia
13.2.2 South Africa
13.2.3 UAE
13.2.4 Rest of Middle East & Africa (MEA)
13.3 Basis Point Share (BPS) Analysis by Country
13.4 Absolute $ Opportunity Assessment by Country
13.5 Market Attractiveness Analysis by Country
13.6 Middle East & Africa (MEA) Ultra-Thin Heat Pipes Market Size Forecast by Type
13.6.1 Round Heat Pipe
13.6.2 Flat Heat Pipe
13.7 Basis Point Share (BPS) Analysis by Type
13.8 Absolute $ Opportunity Assessment by Type
13.9 Market Attractiveness Analysis by Type
13.10 Middle East & Africa (MEA) Ultra-Thin Heat Pipes Market Size Forecast by Applications
13.10.1 Auto Industry
13.10.2 Consumer Electronics
13.10.3 Medical
13.10.4 LED Lighting
13.11 Basis Point Share (BPS) Analysis by Applications
13.12 Absolute $ Opportunity Assessment by Applications
13.13 Market Attractiveness Analysis by Applications
Chapter 14 Competition Landscape
14.1 Ultra-Thin Heat Pipes Market: Competitive Dashboard
14.2 Global Ultra-Thin Heat Pipes Market: Market Share Analysis, 2019
14.3 Company Profiles (Details – Overview, Financials, Developments, Strategy)
14.3.1 Wakefield Thermal Solutions, Inc.
14.3.2 Furukawa
14.3.3 Boyd Corporation
14.3.4 Columbia Staver Ltd
14.3.5 Fujikura Ltd.
14.3.6 Delta Electronics
14.3.7 AMEC Thermasol
14.3.8 Novark Technologies
14.3.9 Suzhou Hemi Electronics
14.3.10 Guangdong Newidea Technology Co., Ltd.
14.3.11 Wakefield Thermal Solutions, Inc.
