Market Overview:
The global lubricants in the plastic processing market is estimated to be valued at US$ XX Mn in 2018 and is projected to reach US$ XX Mn by 2030, exhibiting a CAGR of X.X%. The growth of the market can be attributed to the increasing demand for lubricants from various end-use industries such as construction, automotive, packaging and others. In terms of type, paraffin/mineral oil accounted for a major share of the global lubricants in plastic processing market in 2017. However, fatty amides are projected to exhibit highest CAGR during the forecast period owing to its properties such as low volatility and high thermal stability. In terms of application, construction held a dominant share of the global lubricants in plastic processing market in 2017. However, automotive is expected to witness highest CAGR during 2018-2030 due to increasing demand for automobiles across different regions.
Product Definition:
Lubricants are used in the plastic processing to reduce friction and wear. Lubricants help ensure that the machinery runs smoothly and that the parts do not rub together, which could cause damage.
Paraffin/Mineral Oil :
Paraffin/mineral oil is a hydrocarbon-based wax, which is obtained as a byproduct in the refining of crude oil. It has been used as an important raw material for manufacturing various products including candles, cosmetics & personal care products and lubricants.
Metallic Stearates:
Metallic stearates are used as lubricants in the plastic processing market owing to their properties such as low volatility, high viscosity, and excellent thermal stability. They are added to lubricating oils for improving their flow behavior and reduce foam formation. These products also help in maintaining the desired temperature of operating units along with providing a smooth functioning environment by reducing oil decomposition or oxidation.
Application Insights:
The construction industry was the largest application segment in 2017 and is expected to witness significant growth over the forecast period. The global rise in construction activities owing to growing population, rapid urbanization, and infrastructure development is anticipated to drive demand for lubricants in this application segment.
Packaging was another prominent segment accounting for over 15% of market share in 2017. Growing packaging activities due to increasing consumerism coupled with rising disposable income has led consumers around the world towards a more cluttered lifestyle which has resulted into an increased need for packaged food & beverages products driving demand further.
Consumer goods accounted for 9% of overall volume share on account of high usage rates coupled with environmental concerns regarding petroleum-based oils have driven manufacturers towards developing plant-based or synthetic alternatives that are free from harmful substances such as polycyclic aromatic hydrocarbons (PAHs).
Regional Analysis:
Asia Pacific dominated the global market in 2017 and is expected to continue its dominance over the forecast period. The growth of this region can be attributed to increasing demand from end-use industries such as packaging, automotive, construction, and consumer goods. China is one of the largest economies that contribute significantly towards regional growth owing to rapid industrialization along with a large population base.
The Asia Pacific has been witnessing strong economic growth on account of rising disposable income coupled with expanding middle-class population looking for better lifestyles resulting in an increased demand for automobiles across countries such as India, Indonesia, Malaysia among others which will drive industry expansion over next eight years.
Europe was another significant contributor towards global lubricants market share owing to high consumption from numerous application industries including machinery & equipment manufacturing (automotive; industrial; marine), oil & gas sector (pipeline maintenance), metal processing/crafting etc.
Growth Factors:
- Increasing demand from the automotive industry
- Growing demand for lubricants in the packaging industry
- Rising demand for bio-based lubricants
- Increasing penetration of synthetic lubricants in developing countries
- Proliferation of new applications for lubricants
Scope Of The Report
Report Attributes
Report Details
Report Title
Lubricants in the Plastic Processing Market Research Report
By Type
Paraffin/Mineral Oil , Metallic Stearates, Petroleum/Polyolefin Wax, Fatty Amides, Esters/Acids/Alcohols, Other Lubricants
By Application
Construction , Packaging, Consumer Goods, Automotive, Others
By Companies
Baerlocher, Valtris Specialty Chemicals, Clariant, PMC Biogenix, BASF SE, Peter Greven (Norac), Faci SpA, FERRO-PLAST SrL, Exxon Mobil, Shell, Sun Ace, Trecora Chemicals
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
233
Number of Tables & Figures
164
Customization Available
Yes, the report can be customized as per your need.
Global Lubricants in the Plastic Processing Market Report Segments:
The global Lubricants in the Plastic Processing market is segmented on the basis of:
Types
Paraffin/Mineral Oil , Metallic Stearates, Petroleum/Polyolefin Wax, Fatty Amides, Esters/Acids/Alcohols, Other Lubricants
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Construction , Packaging, Consumer Goods, Automotive, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Baerlocher
- Valtris Specialty Chemicals
- Clariant
- PMC Biogenix
- BASF SE
- Peter Greven (Norac)
- Faci SpA
- FERRO-PLAST SrL
- Exxon Mobil
- Shell
- Sun Ace
- Trecora Chemicals
Highlights of The Lubricants in the Plastic Processing Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Paraffin/Mineral OilÂ
- Metallic Stearates
- Petroleum/Polyolefin Wax
- Fatty Amides
- Esters/Acids/Alcohols
- Other Lubricants
- By Application:
- ConstructionÂ
- Packaging
- Consumer Goods
- Automotive
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Lubricants in the Plastic Processing Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Lubricants are substances that reduce friction and wear in the plastic processing. They can be used to help machines move more easily, or to keep parts from sticking together.
Some of the major players in the lubricants in the plastic processing market are Baerlocher, Valtris Specialty Chemicals, Clariant, PMC Biogenix, BASF SE, Peter Greven (Norac), Faci SpA, FERRO-PLAST SrL, Exxon Mobil, Shell, Sun Ace, Trecora Chemicals.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Lubricants in the Plastic Processing Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Lubricants in the Plastic Processing Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Lubricants in the Plastic Processing Market - Supply Chain
4.5. Global Lubricants in the Plastic Processing Market Forecast
4.5.1. Lubricants in the Plastic Processing Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Lubricants in the Plastic Processing Market Size (000 Units) and Y-o-Y Growth
4.5.3. Lubricants in the Plastic Processing Market Absolute $ Opportunity
5. Global Lubricants in the Plastic Processing Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Lubricants in the Plastic Processing Market Size and Volume Forecast by Type
5.3.1. Paraffin/Mineral Oil
5.3.2. Metallic Stearates
5.3.3. Petroleum/Polyolefin Wax
5.3.4. Fatty Amides
5.3.5. Esters/Acids/Alcohols
5.3.6. Other Lubricants
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Lubricants in the Plastic Processing Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Lubricants in the Plastic Processing Market Size and Volume Forecast by Application
6.3.1. Construction
6.3.2. Packaging
6.3.3. Consumer Goods
6.3.4. Automotive
6.3.5. Others
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Lubricants in the Plastic Processing Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Lubricants in the Plastic Processing Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Lubricants in the Plastic Processing Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Lubricants in the Plastic Processing Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Lubricants in the Plastic Processing Demand Share Forecast, 2019-2026
9. North America Lubricants in the Plastic Processing Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Lubricants in the Plastic Processing Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Lubricants in the Plastic Processing Market Size and Volume Forecast by Application
9.4.1. Construction
9.4.2. Packaging
9.4.3. Consumer Goods
9.4.4. Automotive
9.4.5. Others
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Lubricants in the Plastic Processing Market Size and Volume Forecast by Type
9.7.1. Paraffin/Mineral Oil
9.7.2. Metallic Stearates
9.7.3. Petroleum/Polyolefin Wax
9.7.4. Fatty Amides
9.7.5. Esters/Acids/Alcohols
9.7.6. Other Lubricants
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Lubricants in the Plastic Processing Demand Share Forecast, 2019-2026
10. Latin America Lubricants in the Plastic Processing Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Lubricants in the Plastic Processing Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Lubricants in the Plastic Processing Market Size and Volume Forecast by Application
10.4.1. Construction
10.4.2. Packaging
10.4.3. Consumer Goods
10.4.4. Automotive
10.4.5. Others
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Lubricants in the Plastic Processing Market Size and Volume Forecast by Type
10.7.1. Paraffin/Mineral Oil
10.7.2. Metallic Stearates
10.7.3. Petroleum/Polyolefin Wax
10.7.4. Fatty Amides
10.7.5. Esters/Acids/Alcohols
10.7.6. Other Lubricants
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Lubricants in the Plastic Processing Demand Share Forecast, 2019-2026
11. Europe Lubricants in the Plastic Processing Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Lubricants in the Plastic Processing Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Lubricants in the Plastic Processing Market Size and Volume Forecast by Application
11.4.1. Construction
11.4.2. Packaging
11.4.3. Consumer Goods
11.4.4. Automotive
11.4.5. Others
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Lubricants in the Plastic Processing Market Size and Volume Forecast by ype
11.7.1. Paraffin/Mineral Oil
11.7.2. Metallic Stearates
11.7.3. Petroleum/Polyolefin Wax
11.7.4. Fatty Amides
11.7.5. Esters/Acids/Alcohols
11.7.6. Other Lubricants
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Lubricants in the Plastic Processing Demand Share, 2019-2026
12. Asia Pacific Lubricants in the Plastic Processing Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Lubricants in the Plastic Processing Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Lubricants in the Plastic Processing Market Size and Volume Forecast by Application
12.4.1. Construction
12.4.2. Packaging
12.4.3. Consumer Goods
12.4.4. Automotive
12.4.5. Others
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Lubricants in the Plastic Processing Market Size and Volume Forecast by Type
12.7.1. Paraffin/Mineral Oil
12.7.2. Metallic Stearates
12.7.3. Petroleum/Polyolefin Wax
12.7.4. Fatty Amides
12.7.5. Esters/Acids/Alcohols
12.7.6. Other Lubricants
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Lubricants in the Plastic Processing Demand Share, 2019-2026
13. Middle East & Africa Lubricants in the Plastic Processing Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Lubricants in the Plastic Processing Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Lubricants in the Plastic Processing Market Size and Volume Forecast by Application
13.4.1. Construction
13.4.2. Packaging
13.4.3. Consumer Goods
13.4.4. Automotive
13.4.5. Others
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Lubricants in the Plastic Processing Market Size and Volume Forecast by Type
13.7.1. Paraffin/Mineral Oil
13.7.2. Metallic Stearates
13.7.3. Petroleum/Polyolefin Wax
13.7.4. Fatty Amides
13.7.5. Esters/Acids/Alcohols
13.7.6. Other Lubricants
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Lubricants in the Plastic Processing Demand Share, 2019-2026
14. Competition Landscape
14.1. Global Lubricants in the Plastic Processing Market: Market Share Analysis
14.2. Lubricants in the Plastic Processing Distributors and Customers
14.3. Lubricants in the Plastic Processing Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. Baerlocher
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. Valtris Specialty Chemicals
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Clariant
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. PMC Biogenix
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. BASF SE
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. Peter Greven (Norac)
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. Faci SpA
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. FERRO-PLAST SrL
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Exxon Mobil
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. Shell
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. Sun Ace
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. Trecora Chemicals
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. COMPANY 13
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. COMPANY 14
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. COMPANY 15
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. COMPANY 16
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. COMPANY 17
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. COMPANY 18
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
14.4.19.4. Strategic Outlook
14.4.20. COMPANY 20
14.4.20.1. Overvie
