The global reinforced bar processing equipment market is expected to grow at a CAGR of 4.5% during the forecast period, to reach USD 1.2 billion by 2030. The growth of this market is driven by the increasing demand for steel products and construction/engineering contractors in emerging economies such as China and India, which are witnessing rapid urbanization and industrialization. Reinforced bar bending machine segment accounted for the largest share in the global reinforced bar processing equipment market in 2017, followed by reinforced bar shearing machine segment. Reinforced bar bending machine segment is expected to maintain its dominance throughout the forecast period due to its high demand from steel product manufacturers across various regions such as North America, Europe, Asia Pacific and Middle East & Africa (MEA). Reinforced bars are used extensively in various industries such as construction/engineering contractors, automotive industry etc, which has led to an increase in demand for these machines over time.
- The global Reinforced Bar Processing Equipment market is expected to grow at a CAGR of 3.5% during the forecast period, 2018-2025.
- The global Reinforced Bar Processing Equipment market is driven by factors such as increasing demand for steel and metal products, growing construction industry, and increasing demand for high-quality steel products in emerging economies such as India and China.
- Increasing demand for high-quality steel products in emerging economies such as India and China is one of the major drivers of the global Reinforced Bar Processing Equipment market growth over the forecast period 2018-2025.
- Increasing construction industry in developing countries such as India and China has led to an increase in demand for metal products which has resulted in an increase in demand for reinforced bar processing equipment over the forecast period 2018-2025 . This factor will drive the growth of this market during this time frame due to increased need for reinforcing bars used by contractors while constructing buildings or other structures that require reinforcement bars to be installed on concrete slabs or walls before pouring concrete on them so that they can withstand heavy loads without bending or breaking under pressure from weight applied on them from above ground level or below ground level respectively.
Industry Growth Insights published a new data on “Reinforced Bar Processing Equipment Market”. The research report is titled “Reinforced Bar Processing Equipment Market research by Types (Reinforced Bar Bending Machine, Reinforced Bar Shearing Machine, Reinforced Bar De-Coiling & Straightening, Others), By Applications (Steel Product Manufacturers, Construction/Engineering Contractors, Others), By Players/Companies Schnell Spa, Jaypee Group, Gensco Equipment, EVG Entwicklungs-und Verwertungs, KRB Machinery, Eurobend, PEDAX, Ltd, Toyo Kensetsu Kohki, Ellsen Bending Machine, SIMPEDIL SRL, A.W.M. S.p.A., GALANOS S.A., MEP Group, Progress Maschinen & Automation, DARHUNG Inc, Henan Sinch Machinery, TJK Machinery (Tianjin), Chengdu Gute Machinery Works”.
Scope Of The Report
Report Attributes
Report Details
Report Title
Reinforced Bar Processing Equipment Market Research Report
By Type
Reinforced Bar Bending Machine, Reinforced Bar Shearing Machine, Reinforced Bar De-Coiling & Straightening, Others
By Application
Steel Product Manufacturers, Construction/Engineering Contractors, Others
By Companies
Schnell Spa, Jaypee Group, Gensco Equipment, EVG Entwicklungs-und Verwertungs, KRB Machinery, Eurobend, PEDAX, Ltd, Toyo Kensetsu Kohki, Ellsen Bending Machine, SIMPEDIL SRL, A.W.M. S.p.A., GALANOS S.A., MEP Group, Progress Maschinen & Automation, DARHUNG Inc, Henan Sinch Machinery, TJK Machinery (Tianjin), Chengdu Gute Machinery Works
Regions Covered
North America, Europe, APAC, Latin America, MEA
Base Year
2021
Historical Year
2019 to 2020 (Data from 2010 can be provided as per availability)
Forecast Year
2030
Number of Pages
242
Number of Tables & Figures
170
Customization Available
Yes, the report can be customized as per your need.
Global Reinforced Bar Processing Equipment Market Report Segments:
The global Reinforced Bar Processing Equipment market is segmented on the basis of:
Types
Reinforced Bar Bending Machine, Reinforced Bar Shearing Machine, Reinforced Bar De-Coiling & Straightening, Others
The product segment provides information about the market share of each product and the respective CAGR during the forecast period. It lays out information about the product pricing parameters, trends, and profits that provides in-depth insights of the market. Furthermore, it discusses latest product developments & innovation in the market.
Applications
Steel Product Manufacturers, Construction/Engineering Contractors, Others
The application segment fragments various applications of the product and provides information on the market share and growth rate of each application segment. It discusses the potential future applications of the products and driving and restraining factors of each application segment.
Some of the companies that are profiled in this report are:
- Schnell Spa
- Jaypee Group
- Gensco Equipment
- EVG Entwicklungs-und Verwertungs
- KRB Machinery
- Eurobend
- PEDAX, Ltd
- Toyo Kensetsu Kohki
- Ellsen Bending Machine
- SIMPEDIL SRL
- A.W.M. S.p.A.
- GALANOS S.A.
- MEP Group
- Progress Maschinen & Automation
- DARHUNG Inc
- Henan Sinch Machinery
- TJK Machinery (Tianjin)
- Chengdu Gute Machinery Works
Highlights of The Reinforced Bar Processing Equipment Market Report:
- The market structure and projections for the coming years.
- Drivers, restraints, opportunities, and current trends of market.
- Historical data and forecast.
- Estimations for the forecast period 2030.
- Developments and trends in the market.
- By Type:
- Reinforced Bar Bending Machine
- Reinforced Bar Shearing Machine
- Reinforced Bar De-Coiling & Straightening
- Others
- By Application:
- Steel Product Manufacturers
- Construction/Engineering Contractors
- Others
- Market scenario by region, sub-region, and country.
- Market share of the market players, company profiles, product specifications, SWOT analysis, and competitive landscape.
- Analysis regarding upstream raw materials, downstream demand, and current market dynamics.
- Government Policies, Macro & Micro economic factors are also included in the report.
We have studied the Reinforced Bar Processing Equipment Market in 360 degrees via. both primary & secondary research methodologies. This helped us in building an understanding of the current market dynamics, supply-demand gap, pricing trends, product preferences, consumer patterns & so on. The findings were further validated through primary research with industry experts & opinion leaders across countries. The data is further compiled & validated through various market estimation & data validation methodologies. Further, we also have our in-house data forecasting model to predict market growth up to 2030.
Regional Analysis
- North America
- Europe
- Asia Pacific
- Middle East & Africa
- Latin America
Note: A country of choice can be added in the report at no extra cost. If more than one country needs to be added, the research quote will vary accordingly.
The geographical analysis part of the report provides information about the product sales in terms of volume and revenue in regions. It lays out potential opportunities for the new entrants, emerging players, and major players in the region. The regional analysis is done after considering the socio-economic factors and government regulations of the countries in the regions.
How you may use our products:
- Correctly Positioning New Products
- Market Entry Strategies
- Business Expansion Strategies
- Consumer Insights
- Understanding Competition Scenario
- Product & Brand Management
- Channel & Customer Management
- Identifying Appropriate Advertising Appeals
8 Reasons to Buy This Report
- Includes a Chapter on the Impact of COVID-19 Pandemic On the Market
- Report Prepared After Conducting Interviews with Industry Experts & Top Designates of the Companies in the Market
- Implemented Robust Methodology to Prepare the Report
- Includes Graphs, Statistics, Flowcharts, and Infographics to Save Time
- Industry Growth Insights Provides 24/5 Assistance Regarding the Doubts in the Report
- Provides Information About the Top-winning Strategies Implemented by Industry Players.
- In-depth Insights On the Market Drivers, Restraints, Opportunities, and Threats
- Customization of the Report Available
Frequently Asked Questions?
Reinforced bar processing equipment is a type of industrial machinery used to produce reinforced concrete. It consists of a series of bars that are heated and then bent into desired shapes using hydraulic pressure.
Some of the major players in the reinforced bar processing equipment market are Schnell Spa, Jaypee Group, Gensco Equipment, EVG Entwicklungs-und Verwertungs, KRB Machinery, Eurobend, PEDAX, Ltd, Toyo Kensetsu Kohki, Ellsen Bending Machine, SIMPEDIL SRL, A.W.M. S.p.A., GALANOS S.A., MEP Group, Progress Maschinen & Automation, DARHUNG Inc, Henan Sinch Machinery, TJK Machinery (Tianjin), Chengdu Gute Machinery Works.
The reinforced bar processing equipment market is expected to register a CAGR of 4.5%.
1. Executive Summary
2. Assumptions and Acronyms Used
3. Research Methodology
4. Reinforced Bar Processing Equipment Market Overview
4.1. Introduction
4.1.1. Market Taxonomy
4.1.2. Market Definition
4.2. Macro-Economic Factors
4.2.1. Industry Outlook
4.3. Reinforced Bar Processing Equipment Market Dynamics
4.3.1. Market Drivers
4.3.2. Market Restraints
4.3.3. Opportunity
4.3.4. Market Trends
4.4. Reinforced Bar Processing Equipment Market - Supply Chain
4.5. Global Reinforced Bar Processing Equipment Market Forecast
4.5.1. Reinforced Bar Processing Equipment Market Size (US$ Mn) and Y-o-Y Growth
4.5.2. Reinforced Bar Processing Equipment Market Size (000 Units) and Y-o-Y Growth
4.5.3. Reinforced Bar Processing Equipment Market Absolute $ Opportunity
5. Global Reinforced Bar Processing Equipment Market Analysis and Forecast by Type
5.1. Market Trends
5.2. Introduction
5.2.1. Basis Point Share (BPS) Analysis by Type
5.2.2. Y-o-Y Growth Projections by Type
5.3. Reinforced Bar Processing Equipment Market Size and Volume Forecast by Type
5.3.1. Reinforced Bar Bending Machine
5.3.2. Reinforced Bar Shearing Machine
5.3.3. Reinforced Bar De-Coiling & Straightening
5.3.4. Others
5.4. Absolute $ Opportunity Assessment by Type
5.5. Market Attractiveness/Growth Potential Analysis by Type
6. Global Reinforced Bar Processing Equipment Market Analysis and Forecast by Application
6.1. Market Trends
6.2. Introduction
6.2.1. Basis Point Share (BPS) Analysis by Application
6.2.2. Y-o-Y Growth Projections by Application
6.3. Reinforced Bar Processing Equipment Market Size and Volume Forecast by Application
6.3.1. Steel Product Manufacturers
6.3.2. Construction/Engineering Contractors
6.3.3. Others
6.4. Absolute $ Opportunity Assessment by Application
6.5. Market Attractiveness/Growth Potential Analysis by Application
7. Global Reinforced Bar Processing Equipment Market Analysis and Forecast by Sales Channel
7.1. Market Trends
7.2. Introduction
7.2.1. Basis Point Share (BPS) Analysis by Sales Channel
7.2.2. Y-o-Y Growth Projections by Sales Channel
7.3. Reinforced Bar Processing Equipment Market Size and Volume Forecast by Sales Channel
7.3.1. Manufacturer/Distributor/Service Provider
7.3.2. Aftermarket
7.4. Absolute $ Opportunity Assessment by Sales Channel
7.5. Market Attractiveness/Growth Potential Analysis by Sales Channel
8. Global Reinforced Bar Processing Equipment Market Analysis and Forecast by Region
8.1. Market Trends
8.2. Introduction
8.2.1. Basis Point Share (BPS) Analysis by Region
8.2.2. Y-o-Y Growth Projections by Region
8.3. Reinforced Bar Processing Equipment Market Size and Volume Forecast by Region
8.3.1. North America
8.3.2. Latin America
8.3.3. Europe
8.3.4. Asia Pacific
8.3.5. Middle East and Africa (MEA)
8.4. Absolute $ Opportunity Assessment by Region
8.5. Market Attractiveness/Growth Potential Analysis by Region
8.6. Global Reinforced Bar Processing Equipment Demand Share Forecast, 2019-2026
9. North America Reinforced Bar Processing Equipment Market Analysis and Forecast
9.1. Introduction
9.1.1. Basis Point Share (BPS) Analysis by Country
9.1.2. Y-o-Y Growth Projections by Country
9.2. North America Reinforced Bar Processing Equipment Market Size and Volume Forecast by Country
9.2.1. U.S.
9.2.2. Canada
9.3. Absolute $ Opportunity Assessment by Country
9.4. North America Reinforced Bar Processing Equipment Market Size and Volume Forecast by Application
9.4.1. Steel Product Manufacturers
9.4.2. Construction/Engineering Contractors
9.4.3. Others
9.5. Basis Point Share (BPS) Analysis by Application
9.6. Y-o-Y Growth Projections by Application
9.7. North America Reinforced Bar Processing Equipment Market Size and Volume Forecast by Type
9.7.1. Reinforced Bar Bending Machine
9.7.2. Reinforced Bar Shearing Machine
9.7.3. Reinforced Bar De-Coiling & Straightening
9.7.4. Others
9.8. Basis Point Share (BPS) Analysis by Type
9.9. Y-o-Y Growth Projections by Type
9.10. Market Attractiveness/Growth Potential Analysis
9.10.1. By Country
9.10.2. By Product Type
9.10.3. By Application
9.10.4. By Sales Channel
9.11. North America Reinforced Bar Processing Equipment Demand Share Forecast, 2019-2026
10. Latin America Reinforced Bar Processing Equipment Market Analysis and Forecast
10.1. Introduction
10.1.1. Basis Point Share (BPS) Analysis by Country
10.1.2. Y-o-Y Growth Projections by Country
10.1.3. Latin America Average Pricing Analysis
10.2. Latin America Reinforced Bar Processing Equipment Market Size and Volume Forecast by Country
10.2.1. Brazil
10.2.2. Mexico
10.2.3. Rest of Latin America
10.3. Absolute $ Opportunity Assessment by Country
10.4. Latin America Reinforced Bar Processing Equipment Market Size and Volume Forecast by Application
10.4.1. Steel Product Manufacturers
10.4.2. Construction/Engineering Contractors
10.4.3. Others
10.5. Basis Point Share (BPS) Analysis by Application
10.6. Y-o-Y Growth Projections by Application
10.7. Latin America Reinforced Bar Processing Equipment Market Size and Volume Forecast by Type
10.7.1. Reinforced Bar Bending Machine
10.7.2. Reinforced Bar Shearing Machine
10.7.3. Reinforced Bar De-Coiling & Straightening
10.7.4. Others
10.8. Basis Point Share (BPS) Analysis by Type
10.9. Y-o-Y Growth Projections by Type
10.10. Market Attractiveness/Growth Potential Analysis
10.10.1. By Country
10.10.2. By Product Type
10.10.3. By Application
10.10.4. By Sales Channel
10.11. Latin America Reinforced Bar Processing Equipment Demand Share Forecast, 2019-2026
11. Europe Reinforced Bar Processing Equipment Market Analysis and Forecast
11.1. Introduction
11.1.1. Basis Point Share (BPS) Analysis by Country
11.1.2. Y-o-Y Growth Projections by Country
11.1.3. Europe Average Pricing Analysis
11.2. Europe Reinforced Bar Processing Equipment Market Size and Volume Forecast by Country
11.2.1. Germany
11.2.2. France
11.2.3. Italy
11.2.4. U.K.
11.2.5. Spain
11.2.6. Russia
11.2.7. Rest of Europe
11.3. Absolute $ Opportunity Assessment by Country
11.4. Europe Reinforced Bar Processing Equipment Market Size and Volume Forecast by Application
11.4.1. Steel Product Manufacturers
11.4.2. Construction/Engineering Contractors
11.4.3. Others
11.5. Basis Point Share (BPS) Analysis by Application
11.6. Y-o-Y Growth Projections by Application
11.7. Europe Reinforced Bar Processing Equipment Market Size and Volume Forecast by Type
11.7.1. Reinforced Bar Bending Machine
11.7.2. Rinforced Bar Shearing Machine
11.7.3. Reinforced Bar De-Coiling & Straightening
11.7.4. Others
11.8. Basis Point Share (BPS) Analysis by Type
11.9. Y-o-Y Growth Projections by Type
11.10. Market Attractiveness/Growth Potential Analysis
11.10.1. By Country
11.10.2. By Product Type
11.10.3. By Application
11.10.4. By Sales Channel
11.11. Europe Reinforced Bar Processing Equipment Demand Share, 2019-2026
12. Asia Pacific Reinforced Bar Processing Equipment Market Analysis and Forecast
12.1. Introduction
12.1.1. Basis Point Share (BPS) Analysis by Country
12.1.2. Y-o-Y Growth Projections by Country
12.1.3. Asia Pacific Average Pricing Analysis
12.2. Asia Pacific Reinforced Bar Processing Equipment Market Size and Volume Forecast by Country
12.2.1. China
12.2.2. Japan
12.2.3. South Korea
12.2.4. India
12.2.5. Australia
12.2.6. Rest of Asia Pacific (APAC)
12.3. Absolute $ Opportunity Assessment by Country
12.4. Asia Pacific Reinforced Bar Processing Equipment Market Size and Volume Forecast by Application
12.4.1. Steel Product Manufacturers
12.4.2. Construction/Engineering Contractors
12.4.3. Others
12.5. Basis Point Share (BPS) Analysis by Application
12.6. Y-o-Y Growth Projections by Application
12.7. Asia Pacific Reinforced Bar Processing Equipment Market Size and Volume Forecast by Type
12.7.1. Reinforced Bar Bending Machine
12.7.2. Reinforced Bar Shearing Machine
12.7.3. Reinforced Bar De-Coiling & Straightening
12.7.4. Others
12.8. Basis Point Share (BPS) Analysis by Type
12.9. Y-o-Y Growth Projections by Type
12.10. Market Attractiveness/Growth Potential Analysis
12.10.1. By Country
12.10.2. By Product Type
12.10.3. By Application
12.10.4. By Sales Channel
12.11. Asia Pacific Reinforced Bar Processing Equipment Demand Share, 2019-2026
13. Middle East & Africa Reinforced Bar Processing Equipment Market Analysis and Forecast
13.1. Introduction
13.1.1. Basis Point Share (BPS) Analysis by Country
13.1.2. Y-o-Y Growth Projections by Country
13.1.3. Asia Pacific Average Pricing Analysis
13.2. Middle East & Africa Reinforced Bar Processing Equipment Market Size and Volume Forecast by Country
13.2.1. Saudi Arabia
13.2.2. South Africa
13.2.3. UAE
13.2.4. Rest of Middle East & Africa (MEA)
13.3. Absolute $ Opportunity Assessment by Country
13.4. Middle East & Africa Reinforced Bar Processing Equipment Market Size and Volume Forecast by Application
13.4.1. Steel Product Manufacturers
13.4.2. Construction/Engineering Contractors
13.4.3. Others
13.5. Basis Point Share (BPS) Analysis by Application
13.6. Y-o-Y Growth Projections by Application
13.7. Middle East & Africa Reinforced Bar Processing Equipment Market Size and Volume Forecast by Type
13.7.1. Reinforced Bar Bending Machine
13.7.2. Reinforced Bar Shearing Machine
13.7.3. Reinforced Bar De-Coiling & Straightening
13.7.4. Others
13.8. Basis Point Share (BPS) Analysis by Type
13.9. Y-o-Y Growth Projections by Type
13.10. Market Attractiveness/Growth Potential Analysis
13.10.1. By Country
13.10.2. By Product Type
13.10.3. By Application
13.10.4. By Sales Channel
13.11. Middle East & Africa Reinforced Bar Processing Equipment Demand Share, 2019-2026
14. Competition Landscape
14.1. Global Reinforced Bar Processing Equipment Market: Market Share Analysis
14.2. Reinforced Bar Processing Equipment Distributors and Customers
14.3. Reinforced Bar Processing Equipment Market: Competitive Dashboard
14.4. Company Profiles (Details Overview, Financials, Developments, Strategy)
14.4.1. Schnell Spa
14.4.1.1. Overview
14.4.1.2. Financials
14.4.1.3. Developments
14.4.1.4. Strategic Outlook
14.4.2. Jaypee Group
14.4.2.1. Overview
14.4.2.2. Financials
14.4.2.3. Developments
14.4.2.4. Strategic Outlook
14.4.3. Gensco Equipment
14.4.3.1. Overview
14.4.3.2. Financials
14.4.3.3. Developments
14.4.3.4. Strategic Outlook
14.4.4. EVG Entwicklungs-und Verwertungs
14.4.4.1. Overview
14.4.4.2. Financials
14.4.4.3. Developments
14.4.4.4. Strategic Outlook
14.4.5. KRB Machinery
14.4.5.1. Overview
14.4.5.2. Financials
14.4.5.3. Developments
14.4.5.4. Strategic Outlook
14.4.6. Eurobend
14.4.6.1. Overview
14.4.6.2. Financials
14.4.6.3. Developments
14.4.6.4. Strategic Outlook
14.4.7. PEDAX, Ltd
14.4.7.1. Overview
14.4.7.2. Financials
14.4.7.3. Developments
14.4.7.4. Strategic Outlook
14.4.8. Toyo Kensetsu Kohki
14.4.8.1. Overview
14.4.8.2. Financials
14.4.8.3. Developments
14.4.8.4. Strategic Outlook
14.4.9. Ellsen Bending Machine
14.4.9.1. Overview
14.4.9.2. Financials
14.4.9.3. Developments
14.4.9.4. Strategic Outlook
14.4.10. SIMPEDIL SRL
14.4.10.1. Overview
14.4.10.2. Financials
14.4.10.3. Developments
14.4.10.4. Strategic Outlook
14.4.11. A.W.M. S.p.A.
14.4.11.1. Overview
14.4.11.2. Financials
14.4.11.3. Developments
14.4.11.4. Strategic Outlook
14.4.12. GALANOS S.A.
14.4.12.1. Overview
14.4.12.2. Financials
14.4.12.3. Developments
14.4.12.4. Strategic Outlook
14.4.13. MEP Group
14.4.13.1. Overview
14.4.13.2. Financials
14.4.13.3. Developments
14.4.13.4. Strategic Outlook
14.4.14. Progress Maschinen & Automation
14.4.14.1. Overview
14.4.14.2. Financials
14.4.14.3. Developments
14.4.14.4. Strategic Outlook
14.4.15. DARHUNG Inc
14.4.15.1. Overview
14.4.15.2. Financials
14.4.15.3. Developments
14.4.15.4. Strategic Outlook
14.4.16. Henan Sinch Machinery
14.4.16.1. Overview
14.4.16.2. Financials
14.4.16.3. Developments
14.4.16.4. Strategic Outlook
14.4.17. TJK Machinery (Tianjin)
14.4.17.1. Overview
14.4.17.2. Financials
14.4.17.3. Developments
14.4.17.4. Strategic Outlook
14.4.18. Chengdu Gute Machinery Works
14.4.18.1. Overview
14.4.18.2. Financials
14.4.18.3. Developments
14.4.18.4. Strategic Outlook
14.4.19. COMPANY 19
14.4.19.1. Overview
14.4.19.2. Financials
14.4.19.3. Developments
14.4.19.4. Strategic Outlook
14.4.20. COMPANY 20
14.4.20.1. Overview
14.4.20.2. Financials
14.4.20.3. Developments
14.4.20.4. Strategic Outlook